Difficulty
Moderate
Steps
4
Time Required
20 minutes
Sections
2
- Opening PowerMac G4 M5183 Case
- 1 step
- DVD-ROM Drive
- 3 steps
Flags
0
BackPower Mac G4 M5183
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Opening PowerMac G4 M5183 Case
- Pull on outer latch.
- Lower door until it is level with your work surface.
- Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.
Pull on outer latch.
Lower door until it is level with your work surface.
Before working on the computer make sure it is not plugged into a power supply, then touch a metal object. This discharges static electricity, which could damage the computer.
1024
Step 2
DVD-ROM Drive
- Removing the faceplate.
- On the inside of the case, find the two plastic tabs.
- While depressing the tabs, remove the faceplate by pulling and rotating outward.
Removing the faceplate.
On the inside of the case, find the two plastic tabs.
While depressing the tabs, remove the faceplate by pulling and rotating outward.
Step 3
- Remove the two screws on the front of the drive with the Phillips #1 screwdriver.
Remove the two screws on the front of the drive with the Phillips #1 screwdriver.
Step 4
- Pull the drive out to allow access to the power and ribbon cables. Do not fully remove.
- Remove both the power and ribbon cable.
Pull the drive out to allow access to the power and ribbon cables. Do not fully remove.
Remove both the power and ribbon cable.
Cancel: I did not complete this guide.
26 other people completed this guide.
Author
with 5 other contributors
Justin Petrilli
Member since: 01/21/2010
3,075 Reputation
11 Guides authored
Badges:
14
+11 more badges
Team
Cal Poly, Team 13-24, Maness Winter 2010
Member of Cal Poly, Team 13-24, Maness Winter 2010
CPSU-MANESS-W10S13G24
4 Members
25 Guides authored