Difficulty
Moderate
Steps
5
Time Required
25 minutes
Sections
3
- Battery Removal
- 1 step
- Keyboard
- 3 steps
- WLAN (WiFi) Module
- 1 step
Flags
1
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
BackHP Elitebook 6930p
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery Removal
- Flip laptop over and locate the battery release button
- Push release button to the left to release battery and gently pull battery from the laptop
Flip laptop over and locate the battery release button
Push release button to the left to release battery and gently pull battery from the laptop
1024
Step 2
Keyboard
- Loosen the three Phillips 2.5×9.0 captive screws that secure the keyboard to the laptop
- Turn the laptop so the keyboard is facing up and locate the 4 retention tabs along the back edge of the keyboard
- Slide the retention clips toward the keyboard to release the keyboard
Loosen the three Phillips 2.5×9.0 captive screws that secure the keyboard to the laptop
Turn the laptop so the keyboard is facing up and locate the 4 retention tabs along the back edge of the keyboard
Slide the retention clips toward the keyboard to release the keyboard
Step 3
- Use a plastic pry tool to lift the rear edge of the keyboard.
- Pull the keyboard slightly towards the display to disengage the tabs along the front of the keyboard from the laptop palm rest.
- Lift the keyboard up to reveal the ribbon connectors
Use a plastic pry tool to lift the rear edge of the keyboard.
Pull the keyboard slightly towards the display to disengage the tabs along the front of the keyboard from the laptop palm rest.
Lift the keyboard up to reveal the ribbon connectors
Step 4
- Release the larger ribbon cable by flipping the brown retainer up so it is parallel with the ribbon cable
- Release the smaller ribbon cable by lifting up the white retainer
- I found it easier to reinstall both cables with the new keyboard resting on the back edge
Release the larger ribbon cable by flipping the brown retainer up so it is parallel with the ribbon cable
Release the smaller ribbon cable by lifting up the white retainer
I found it easier to reinstall both cables with the new keyboard resting on the back edge
Step 5
WLAN (WiFi) Module
- Locate the WLAN module
- Use a plastic spugder or similar to carefully remove the 3 antenna wires from the WLAN module.
- The antenna wires are colour coded tabs on them for easy reinstallation so be sure to take note of the correct order. there are coloured tabs on the wires!
- Remove the 2 M2.5×4.0 screws that secure the WLAN module into the laptop
- With the screws removed the right hand end of the WLAN module will pop up. You may now simply remove the module from the edge connector.
Locate the WLAN module
Use a plastic spugder or similar to carefully remove the 3 antenna wires from the WLAN module.
The antenna wires are colour coded tabs on them for easy reinstallation so be sure to take note of the correct order. there are coloured tabs on the wires!
Remove the 2 M2.5×4.0 screws that secure the WLAN module into the laptop
With the screws removed the right hand end of the WLAN module will pop up. You may now simply remove the module from the edge connector.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
3 other people completed this guide.
Author
with 1 other contributor
Richdave
Member since: 04/09/2010
31,742 Reputation
30 Guides authored
Badges:
51
+48 more badges
Team
Master Techs
Member of Master Techs
Community
310 Members
1,168 Guides authored
