Removing The Samsung La40R81Bd 40In Lcd Tv Main Board Repair Guide

Difficulty

Easy

Steps

2

Time Required

                          15 minutes            

Sections

• Rear Cover
• 1 step
• Main Board
• 1 step

Flags

3

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackSamsung LA40R81BD 40in LCD TV

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Rear Cover               

• Unplug power cable and all AV cables from rear of TV and carefully lay TV face down on a clean flat working surface ensuring that you don’t damage the LCD screen.
• Using a Philips driver remove the 18 screws from the rear panel.
• Gently lift the rear cover off the TV. You may need to wiggle the cover a little however there are no clips holding the cover on so it should come off easily if you have fully unscrewed all 18 screws.

Unplug power cable and all AV cables from rear of TV and carefully lay TV face down on a clean flat working surface ensuring that you don’t damage the LCD screen.

Using a Philips driver remove the 18 screws from the rear panel.

Gently lift the rear cover off the TV. You may need to wiggle the cover a little however there are no clips holding the cover on so it should come off easily if you have fully unscrewed all 18 screws.

1024

Step 2

              Main Board               

• Gently peel away the conductive fabric from the metal cover on the board
• Remove 5 connectors from the board
• Remove 6 screws from the perimeter of the board.
• Lift the main board away from the chassis ensuring you don’s snag or catch any of the cables.

Gently peel away the conductive fabric from the metal cover on the board

Remove 5 connectors from the board

Remove 6 screws from the perimeter of the board.

Lift the main board away from the chassis ensuring you don’s snag or catch any of the cables.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      11 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Richdave                     

Member since: 04/09/2010

31,742 Reputation

                                      30 Guides authored                  



                       Badges:
                       51







                                                        +48 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored