Difficulty
Very easy
Steps
8
Time Required
2 minutes
Sections
1
- Drive Belt
- 8 steps
Flags
3
Grammar Police
Embrace your inner English teacher and help improve this guide’s grammar!
Member-Contributed Guide
An awesome member of our community made this guide. It is not managed by iFixit staff.
Better Introduction
Improve this guide by completing or revising its introduction.
BackCorded Belt Sander Dexter - 900BS2.5
Full Screen
Options
History
Save to Favorites
Download PDF
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Unplug
- Before starting, remember to unplug the device.
Before starting, remember to unplug the device.
1024
Step 2
- Remove the handle by unscrewing the screw.
Remove the handle by unscrewing the screw.
Step 3
- Pry up the sanding belt to remove it.
Pry up the sanding belt to remove it.
Step 4
- Unscrew the four screws to access the drive belt.
Unscrew the four screws to access the drive belt.
Step 5
- Remove the drive belt.
Remove the drive belt.
Step 6
- Replace with the new drive belt. To put it on, place the drive belt on the right wheel first.
Replace with the new drive belt. To put it on, place the drive belt on the right wheel first.
Step 7
- Screw the protection cap back into place with the four screws.
Screw the protection cap back into place with the four screws.
Step 8
- Replace the sanding belt and handle.
Replace the sanding belt and handle.
Cancel: I did not complete this guide.
One other person completed this guide.
These translators are helping us fix the world! Want to contribute? Start translating ›
Special thanks to these translators:
100%
Annie
Annika Faelker
Author
with 1 other contributor
Céline Chemineau
Member since: 01/29/2020
16,042 Reputation
95 Guides authored
Badges:
11
+8 more badges
Team
Leroy Merlin
Member of Leroy Merlin
Community
36 Members
223 Guides authored