Difficulty

Moderate

Steps

15

Time Required

                          30 minutes

Sections

1

  • Repair Broken Connections in the Pyrus PY21S03211
  • 15 steps

Flags

2

Action Shots

Be an action hero! This guide needs images that better demonstrate how to perform specific actions.

Bullets!

Better coordination with markups and the color/type of bullets will help make this guide more clear!

  • BackPyrus PY21S03211

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Repair Broken Connections in the Pyrus PY21S03211
  • Turn the video camera upside down so the bottom of the device is visible.

Turn the video camera upside down so the bottom of the device is visible.

1024

Step 2

  • Pull back the bottom tab to reveal the battery compartment.

Pull back the bottom tab to reveal the battery compartment.

Step 3

  • Pull back tab that is holding in the battery in place and remove the battery from the device.

Pull back tab that is holding in the battery in place and remove the battery from the device.

Step 4

  • Find the device’s HDMI/TV cover.

Find the device’s HDMI/TV cover.

Step 5

  • Open up cover to reveal the device ports.

Open up cover to reveal the device ports.

Step 6

  • Use screwdriver to remove 4mm screws from the port cover.

Use screwdriver to remove 4mm screws from the port cover.

Step 7

  • Use tweezers to remove the plastic port cover.

Use tweezers to remove the plastic port cover.

Step 8

  • Open the display screen.

Open the display screen.

Step 9

  • Use tweezers to carefully pull out the circular stickers to reveal the 4mm screws.

Use tweezers to carefully pull out the circular stickers to reveal the 4mm screws.

Step 10

  • Use a 00 screwdriver to remove all six 4mm screws from the side of the device.

Use a 00 screwdriver to remove all six 4mm screws from the side of the device.

Step 11

  • Use a thin plastic pick to pry off the side of the device and carefully remove the display.

Use a thin plastic pick to pry off the side of the device and carefully remove the display.

Step 12

  • Carefully remove the side face from the device. Avoid pulling on the white connector.

Carefully remove the side face from the device. Avoid pulling on the white connector.

Step 13

  • To remove the side face entirely, find the large white connector, flip open the grey lip with tweezers, and gently remove the white connector.

To remove the side face entirely, find the large white connector, flip open the grey lip with tweezers, and gently remove the white connector.

Step 14

  • Find the broken wire.

Find the broken wire.

Step 15

  • Use the advanced soldering guide to solder the wire back onto the motherboard.

Use the advanced soldering guide to solder the wire back onto the motherboard.

Cancel: I did not complete this guide.

Author

                                      with 5 other contributors 


                    Danielle Hadaway

Member since: 03/31/2016

255 Reputation

                                      3 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Eastern Washington University, Team 1-5, Giguere Spring 2016                        

                                                  Member of Eastern Washington University, Team 1-5, Giguere Spring 2016 



                    EWU-GIGUERE-S16S1G5                     


                                            3 Members                     


                                            3 Guides authored