Repair Guide For The Lg Net10 Repair Guide

Difficulty

Easy

Steps

Time Required

                          10 - 15 minutes

Sections

Complete disassembling of the phone to get to the motherboard
9 steps

Flags

BackLG Net10 300
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Complete disassembling of the phone to get to the motherboard

Frontal view and rear view of the LG Net10 prior to disassembling.

Frontal view and rear view of the LG Net10 prior to disassembling.

1024

Step 2

Remove battery back cover by applying pressure along the groove. The LG logo should be up right. Apply the pressure downwards to remove the cover.

Remove battery back cover by applying pressure along the groove. The LG logo should be up right. Apply the pressure downwards to remove the cover.

Step 3

Remove the battery from the top of the battery.

Remove the battery from the top of the battery.

Step 4

Remove the SIM card, by pushing down on the top of the SIM card and sliding it out from under the metal band.

Remove the SIM card, by pushing down on the top of the SIM card and sliding it out from under the metal band.

Step 5

Remove all four screws from the back of the phone by using a small Phillips head screwdriver and turning it counterclockwise.
The screws are 0.5 centimeters.

Remove all four screws from the back of the phone by using a small Phillips head screwdriver and turning it counterclockwise.

The screws are 0.5 centimeters.

Step 6

Use a wedge, or flat edged tool to separate the phone. Make sure to circle around the entire phone, especially the corners to pull it apart. This can be difficult. This may take several tries, so make sure to be persistent.

Use a wedge, or flat edged tool to separate the phone. Make sure to circle around the entire phone, especially the corners to pull it apart. This can be difficult. This may take several tries, so make sure to be persistent.

Step 7

Separate and remove the two hard covers and the keypad.

Separate and remove the two hard covers and the keypad.

Step 8

Then remove the motherboard from the hard back of the phone.

Then remove the motherboard from the hard back of the phone.

Step 9

Once the phone is completely dissembled, you can replace the screen if it is cracked. You can also replace the keypad if the buttons do not work or if there are other issues with the keypad. Another common desire people have is to unlock the phone. In order to do this, you must replace the SIM card, which is explained in the steps above.

Once the phone is completely dissembled, you can replace the screen if it is cracked. You can also replace the keypad if the buttons do not work or if there are other issues with the keypad. Another common desire people have is to unlock the phone. In order to do this, you must replace the SIM card, which is explained in the steps above.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 4 other contributors

                    Gina

Member since: 04/15/2013

125 Reputation

                                      2 Guides authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       SUNY Cortland, Team 1-1, Getto Spring 2013                        

                                                  Member of SUNY Cortland, Team 1-1, Getto Spring 2013 



                    SUNYCORT-GETTO-S13S1G1                     


                                            4 Members                     


                                            4 Guides authored

Introduction#

What you need#

Team#

Introduction

What you need

Team