Difficulty

Moderate

Steps

8

Time Required

                          10 minutes

Sections

1

  • LCD
  • 8 steps

Flags

2

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackNokia 6500 Slide

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              LCD
  • Press the eject button to open battery enclosure. Remove battery, sim card and micro sd card.

Press the eject button to open battery enclosure. Remove battery, sim card and micro sd card.

1024

Step 2

  • Remove four screws using torx 5 screwdriver.

Remove four screws using torx 5 screwdriver.

Step 3

  • Pry each side evenly around its edges. The phone should start to split into two halves.

Pry each side evenly around its edges. The phone should start to split into two halves.

Step 4

  • The top and bottom half of the phone is still connected by two ribbon connectors each side. Use a thin plastic like a credit card to carefully disconnect it.

The top and bottom half of the phone is still connected by two ribbon connectors each side. Use a thin plastic like a credit card to carefully disconnect it.

Step 5

  • Make sure all components stay on each side (see picture).

Make sure all components stay on each side (see picture).

Step 6

  • Pull the black part away from the rest of the phone in the direction shown by the white arrows follows by the blue.
  • This way you can accessing the two screws at the bottom of the phone. Remove four srews using torx 5 screwdriver.

Pull the black part away from the rest of the phone in the direction shown by the white arrows follows by the blue.

This way you can accessing the two screws at the bottom of the phone. Remove four srews using torx 5 screwdriver.

Step 7

  • Carefully pry out the lcd cover.
  • Make sure the board connector pass the cover by angle.

Carefully pry out the lcd cover.

Make sure the board connector pass the cover by angle.

Step 8

  • Disconnect the LCD connector.
  • Carefully peel the ribbon away from the back of the screen. It’s held in place with double sided tape.
  • The LCD screen will now be loose and can be removed and replace with the new one.

Disconnect the LCD connector.

Carefully peel the ribbon away from the back of the screen. It’s held in place with double sided tape.

The LCD screen will now be loose and can be removed and replace with the new one.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    dwi

Member since: 07/02/2013

163 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Brenda Kent - Feb 2, 2017

Reply

Great - have screen in. Now, have you ever replaced the port / jack for the charger? Mine will not accept the prong all of a sudden

Brenda Kent - Dec 9, 2019

Reply

Got new charger port in 2017, now the battery goes - tried several batteries - and tried them in other phones and are fine - thinking something shorting or draining it in the phone?