Difficulty

Moderate

Steps

6

Time Required

Suggest a time??

Sections

2

  • Disassembling Quasar Microwave Outer Cover
  • 4 steps
  • Repairing Quasar Microwave Fan
  • 2 steps

Flags

1

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackQuasar Microwave Oven MQ7774XW

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

What you need

Step 1

              Disassembling Quasar Microwave Outer Cover
  • Disconnect the power supply cord from the outlet.

Disconnect the power supply cord from the outlet.

1024

Step 2

  • Remove the eight screws holding the wood-patterned cover to the microwave frame.
  • The first four screws are located on either side of the microwave front.

Remove the eight screws holding the wood-patterned cover to the microwave frame.

The first four screws are located on either side of the microwave front.

Step 3

  • Remove the additional four screws securing the wood-paneled case to the microwave frame.

Remove the additional four screws securing the wood-paneled case to the microwave frame.

Step 4

  • Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame.
  • Lift the case upward slowly until the case is free of the microwave.

Placing your hands on either side of the case, slide the case back gently until you feel it completely separate from the microwave frame.

Lift the case upward slowly until the case is free of the microwave.

Step 5

              Repairing Quasar Microwave Fan
  • Locate the fan in the newly exposed interior.
  • Try spinning the fan with your finger. If it spins freely, the fan is not jammed.
  • If the fan does not spin freely, locate what is jamming the fan and remove it.

Locate the fan in the newly exposed interior.

Try spinning the fan with your finger. If it spins freely, the fan is not jammed.

If the fan does not spin freely, locate what is jamming the fan and remove it.

Step 6

  • If the fan is not jammed yet still does not work, check that there are no disconnected wires, especially to the fan.
  • In order to work properly, there should be two wires going in and out of the fan. If you are missing either of these wires, locate the loose wire/s and connect them.

If the fan is not jammed yet still does not work, check that there are no disconnected wires, especially to the fan.

In order to work properly, there should be two wires going in and out of the fan. If you are missing either of these wires, locate the loose wire/s and connect them.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 7 other contributors 


                    Melanie

Member since: 09/26/2012

107 Reputation

                                      2 Guides authored                  



                       Badges:
                       5







                                                        +2 more badges

Team

                       Cal Poly, Team 2-12, Propen Fall 2012                        

                                                  Member of Cal Poly, Team 2-12, Propen Fall 2012 



                    CPSU-PROPEN-F12S2G12                     


                                            3 Members                     


                                            6 Guides authored