Difficulty

Difficult

Steps

5

Time Required

                          30 minutes

Sections

1

  • Repairing Siemens iQ 500 washing machine (WM14Q49…) E17 error message
  • 5 steps

Flags

2

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackWashing Machine

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Repairing Siemens iQ 500 washing machine (WM14Q49...) E17 error message
  • Please follow the manual that was delivered with your machine first, as this guide will only fix one very specific cause of the E17 error and there are many others that are easier to fix. If your E17 warning started after your washing machine started ‘walking’ this guide might be applicable.
  • Please make sure to first check if there is any water at all, if there is no water: this manual does not apply!
  • First: Make sure you disconnect any (power) cable and take any measures needed to work safe.
  • Please note: You might void your guarantee. This manual was created after looking what a professional service engineer actually checked and fixed.

Please follow the manual that was delivered with your machine first, as this guide will only fix one very specific cause of the E17 error and there are many others that are easier to fix. If your E17 warning started after your washing machine started ‘walking’ this guide might be applicable.

Please make sure to first check if there is any water at all, if there is no water: this manual does not apply!

First: Make sure you disconnect any (power) cable and take any measures needed to work safe.

Please note: You might void your guarantee. This manual was created after looking what a professional service engineer actually checked and fixed.

1024

Step 2

  • To check the cable that might have come loose, we need to remove the top-lid (think before you act: this may void any guarantee by Siemens!). There are two screws at the back of the machine that need to be removed to be able to move the top-lid to the back and lift it.

To check the cable that might have come loose, we need to remove the top-lid (think before you act: this may void any guarantee by Siemens!). There are two screws at the back of the machine that need to be removed to be able to move the top-lid to the back and lift it.

Step 3

  • Now you can look into the machine. Don’t touch! Just look if you see a black empty cable hanging loose (see middle of the photo). If so, you actually have this problem, otherwise you have a random other problem and this guide is not for you.

Now you can look into the machine. Don’t touch! Just look if you see a black empty cable hanging loose (see middle of the photo). If so, you actually have this problem, otherwise you have a random other problem and this guide is not for you.

Step 4

  • The black cable should be connected into the white holder in the bottom of the detector (in the top of the photo). Reconnect it.

The black cable should be connected into the white holder in the bottom of the detector (in the top of the photo). Reconnect it.

Step 5

  • Put the top-lid back, and your done. Please make sure the machine is stable and run a wash.

Put the top-lid back, and your done. Please make sure the machine is stable and run a wash.

Cancel: I did not complete this guide.

                                                                                      5 other people completed this guide.

Author

                                      with 2 other contributors 


                    iAmWill

Member since: 09/19/2014

227 Reputation

                                      1 Guide authored                  



                       Badges:
                       7







                                                        +4 more badges

hpcosme - Oct 26, 2016

Reply

Worked for me, thanks!

aldowillebrands - Dec 2, 2016

Reply

First chech if there is any water at all. Malfunction of a waterlock gives the same error and has nothing to do with your washingmachine.

iAmWill - Sep 24, 2017

Added it more explicit to the manual above. Thnx!

sarfarazahmad993051 - Apr 2, 2017

Reply

First checked inlate pipe of filter washing machine. is clean. and then water tap of water is coming properly pressure. if all is right. and then washing machine start.

Rune Amdam - Aug 5, 2017

Reply

Worked for me today!!:-) then i can cancel the service man!!:-) tanx!!