Difficulty

Moderate

Steps

9

Time Required

                          15 - 20 minutes            

Sections

1

  • Repairing Toshiba Satellite C850 - Cleaning the Cooling / Fan System
  • 9 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackToshiba Satellite C850

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

Please SUBSCRIBE to my channel ツ

What you need

Video Overview

Step 1

              Repairing Toshiba Satellite C850 - Cleaning the Cooling / Fan System               
  • Switch-off the laptop and remove the battery.

Switch-off the laptop and remove the battery.

1024

Step 2

  • To remove the Keyboard you must open 7x locking clips.
  • You can use a cutter and a plastic tool.

To remove the Keyboard you must open 7x locking clips.

You can use a cutter and a plastic tool.

Step 3

  • Remove the Keyboard.
  • Remove the HDD, RAM Memory cover.

Remove the Keyboard.

Remove the HDD, RAM Memory cover.

Step 4

  • Remove the HDD and the DVD optical drive.

Remove the HDD and the DVD optical drive.

Step 5

  • Unscrew the screws from the upper and the bottom cases.

Unscrew the screws from the upper and the bottom cases.

Step 6

  • With a plastic tool you can separate the bottom case from the laptop.

With a plastic tool you can separate the bottom case from the laptop.

Step 7

  • Disconnect the CPU fan cable connector.
  • Now you have 4x screws on the CPU side and 2x on the fan.

Disconnect the CPU fan cable connector.

Now you have 4x screws on the CPU side and 2x on the fan.

Step 8

  • Separate the fan from the radiator.
  • Clean the radiator and the fan. Use a soft brush.

Separate the fan from the radiator.

Clean the radiator and the fan. Use a soft brush.

Step 9

  • Put thermal compose to the main CPU and you are ready for assembling.
  • After the start-up, check if the fan works.
  • .
  • Please SUBSCRIBE to my channel ツ

Put thermal compose to the main CPU and you are ready for assembling.

After the start-up, check if the fan works.

.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      13 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    ZFix                     

Member since: 12/09/2013

187,195 Reputation

                                      330 Guides authored                  



                       Badges:
                       35







                                                        +32 more badges                           

Team

                       Master Techs                        

                                                  Member of Master Techs 



                    Community                     


                                            310 Members                     


                                            1,168 Guides authored                     

andymcleod - Feb 23, 2015

Reply

Very good, thank you. :-)

ZFix - Feb 24, 2015

I’ thank you too. :)

SolarJ - Nov 26, 2015

Reply

Absolutely awesome job!

Thanks a plenty.

SolaJ

bikeboatski - Nov 29, 2015

Reply

Can’t you just leave fan assembly installed and start cleaning it with brush and compressed air once you have bottom case cover off? What about just blowing air thru the grill covering the fan and not even removing the bottom case cover?

Jon Pol - Dec 12, 2016

Reply

I just red it and found it’s not for me. But i still felt I’d instantly send $1 to the author, besides those points, which i do not care of.

So I suggest to FIXIT.COM to offer it optionally. I meean… Optinally if you want you may send $1 or more to the author…. and I would put “1” ass default. I want it tobe JUST ONE CLICK. Otherwise I leave.