Difficulty

Easy

Steps

2

Time Required

                          15 minutes

Sections

1

  • closure
  • 2 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackKrups FDK4 Sandwichmaker

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

If you want to tinker yourself, first remove the cover before you order the closing latch, if too many of the pins break off (see instructions) - then you can also order the new cover at the same time. The postage costs as much as the spare part.

What you need

Step 1

              Remove the cover on the bottom of the handle
  • Using a screwdriver, carefully pry off the underside of the handle. The cover is held on the handle with five pins in clips, see photo. The pins can tear off during this action. Luckily for me it was only 2 out of 5 and the cover held up afterwards.

Using a screwdriver, carefully pry off the underside of the handle. The cover is held on the handle with five pins in clips, see photo. The pins can tear off during this action. Luckily for me it was only 2 out of 5 and the cover held up afterwards.

1024

Step 2

  • Under the cover is a tab with two screws. The screws and tab must be removed to insert the new fastener. Please don’t forget to remove the spring from the old closing latch and attach it to the new one! Then screw the tab back in place and put the cover back on.
  • Finished!

Under the cover is a tab with two screws. The screws and tab must be removed to insert the new fastener. Please don’t forget to remove the spring from the old closing latch and attach it to the new one! Then screw the tab back in place and put the cover back on.

Finished!

Follow the steps in reverse order to reassemble your device.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             


        These translators are helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Choojoo

Maria Parker

Author

                                      with 1 other contributor 


                    Mirco

Member since: 03/24/2021

139 Reputation

                                      1 Guide authored                  



                       Badges:
                       5







                                                        +2 more badges

rokost - Jan 4, 2023

Reply

Hi Mirco!

Es ist in der Tat unmöglich das Unterteil im Ganzen zu demontieren. Meines war inzwischen knusprig und ist in Stücke gebrochen :D

Du schreibst vom “gleich Mitbestellen der Unterseite” - hast du vielleicht eine Referenznummer oder einen Link zu der Abdeckung ?

Es gibt überall nur den Clipper selbst, die Griffabdeckung ist leider nirgends zu finden. Die Nummer BI30-061 auf dem Teil bringt einen auch nicht weiter…

Mirco - Jan 4, 2023

Hallo,

Nein, tut mir leid, ich habe keine Nummer dafür. Das Handy, mit dem ich die Fotos machte ist irreparabel und die Fotos weg. Da kann ich nicht weiter helfen.