Difficulty

Moderate

Steps

3

Time Required

                          20 minutes

Sections

  • Back panel
  • 1 step
  • Battery
  • 1 step
  • Speakers
  • 1 step

Flags

1

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

  • BackDell XPS 13 9380 (2019)

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Remove the back panel
  • Before you begin, be sure to turn off your laptop and unplug it from the outlet.
  • Use a Torx T5 driver to unscrew the eight screws securing the back panel.
  • Use a spudger to pry up and loosen the back panel.
  • Lift the back panel up slightly from the non-hinged edge.
  • Pull the back panel away from the hinged edge, wiggling it back and forth to loosen the clips.
  • When the back panel clips are free, remove the back panel.

Before you begin, be sure to turn off your laptop and unplug it from the outlet.

Use a Torx T5 driver to unscrew the eight screws securing the back panel.

Use a spudger to pry up and loosen the back panel.

Lift the back panel up slightly from the non-hinged edge.

Pull the back panel away from the hinged edge, wiggling it back and forth to loosen the clips.

When the back panel clips are free, remove the back panel.

1024

Step 2

              Remove the battery
  • Disconnect the cable from the battery by pulling the connector towards the battery.
  • Pull parallel to the battery, not straight up.
  • Remove the four screws (M2 x 2) securing the battery.
  • Remove the screw (M1.6 x 4) securing the battery.
  • Remove the battery from its recess.

Disconnect the cable from the battery by pulling the connector towards the battery.

Pull parallel to the battery, not straight up.

Remove the four screws (M2 x 2) securing the battery.

Remove the screw (M1.6 x 4) securing the battery.

Remove the battery from its recess.

Step 3

              Remove the speakers
  • We removed or disconnected the battery to avoid any electrical discharge.
  • 1- Disconnect the speaker cable from the motherboard.
  • 2- Remove the four screws (M2x2) that attach the left and right speakers.
  • 3- Note the routing of the cable from the speakers and remove the adhesive tapes (4) that attach the cable to the keyboard.
  • 4- Lift up the left and right speakers and their cables and remove them.

We removed or disconnected the battery to avoid any electrical discharge.

1- Disconnect the speaker cable from the motherboard.

2- Remove the four screws (M2x2) that attach the left and right speakers.

3- Note the routing of the cable from the speakers and remove the adhesive tapes (4) that attach the cable to the keyboard.

4- Lift up the left and right speakers and their cables and remove them.

To reassemble your device, follow the instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.                                             


        Schwarzer is helping us fix the world!      Want to contribute?      Start translating ›

Special thanks to these translators:

100%

Schwarzer

Author

                                      with 1 other contributor 


                    Schwarzer

Member since: 08/07/2019

4,604 Reputation

                                      13 Guides authored                  



                       Badges:
                       33







                                                        +30 more badges

Team

                       i.Fixit FR Team                        

                                                  Member of i.Fixit FR Team 



                    Community                     


                                            3 Members                     


                                            35 Guides authored