Difficulty
Moderate
Steps
4
Time Required
Suggest a time??
Sections
1
- Ram
- 4 steps
Flags
0
BackSony Vaio VPCCB290X
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
What you need
Step 1
Ram
- Turn the laptop upside down. Locate a removable cover, that is screwed shut near the front right of the laptop which is upside down.
Turn the laptop upside down. Locate a removable cover, that is screwed shut near the front right of the laptop which is upside down.
1024
Step 2
- After removing the screw, using your finger slowly lift out and remove the cover.
After removing the screw, using your finger slowly lift out and remove the cover.
Step 3
- Lift the flap
- Locate two connectors on both ends of the short end. This will release the ram, if properly done the long end should slightly lift.
- The ram is to be removed at a 45 degree angle.
Lift the flap
Locate two connectors on both ends of the short end. This will release the ram, if properly done the long end should slightly lift.
The ram is to be removed at a 45 degree angle.
Step 4
- Pull out cleanly and you have now successfully removed the ram.
Pull out cleanly and you have now successfully removed the ram.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Eric Martinez
Member since: 02/14/2017
616 Reputation
6 Guides authored
Badges:
8
+5 more badges
Team
USF Tampa, Team 20-5, Remmell Spring 2017
Member of USF Tampa, Team 20-5, Remmell Spring 2017
USFT-REMMELL-S17S20G5
3 Members
12 Guides authored
