Difficulty
Moderate
Steps
6
Time Required
25 - 35 minutes
Sections
1
- Sprinkler Extension
- 6 steps
Flags
0
BackHome Construction
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Sprinkler Extension
- Dig a one foot wide hole around the broken sprinkler extension down to the pipe fitting.
- The pipe fitting is usually about one foot underground.
Dig a one foot wide hole around the broken sprinkler extension down to the pipe fitting.
The pipe fitting is usually about one foot underground.
1024
Step 2
- Dig around the pipe fitting with a trowel to provide clear access.
Dig around the pipe fitting with a trowel to provide clear access.
Step 3
- Clean the area around the fitting with water until the fitting is mostly free of dirt.
Clean the area around the fitting with water until the fitting is mostly free of dirt.
Step 4
- Unscrew the sprinkler extension from the pipe fitting.
- Once the extension is removed, water may come out of the open pipe fitting.
Unscrew the sprinkler extension from the pipe fitting.
Once the extension is removed, water may come out of the open pipe fitting.
Step 5
- Screw the new sprinkler extension in securely.
Screw the new sprinkler extension in securely.
Step 6
- Test the sprinkler to ensure that there are no leaks.
- Refill the hole tightly.
Test the sprinkler to ensure that there are no leaks.
Refill the hole tightly.
If you have completed the steps successfully you should have a fully functioning sprinkler extension.
Cancel: I did not complete this guide.
Author
with 4 other contributors
Abagayle Serreyn
Member since: 09/11/2015
111 Reputation
1 Guide authored
Badges:
3
Team
Sam Houston State, Team 16-5, Nardone Fall 2015
Member of Sam Houston State, Team 16-5, Nardone Fall 2015
SHSU-NARDONE-F15S16G5
5 Members
1 Guide authored