Featured

Featured Guide

Difficulty

Very easy

Steps

5

Time Required

                          5 minutes

Sections

1

  • Zipper Pull Tab
  • 5 steps

Flags

2

Worn Wear

Patagonia and iFixit are celebrating the stories we wear by collaborating to provide guides for Patagonia’s most popular apparel repairs.

This guide has been found to be exceptionally cool by the iFixit staff.

  • BackPatagonia Zipper

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

For replacement parts or further assistance, contact Patagonia Customer Service.

Video Overview

Step 1

              Zipper Pull Tab
  • Get your new zipper pull and position it with the pull-tab down.
  • Lift up the zipper, as if you were pulling the zipper closed.

Get your new zipper pull and position it with the pull-tab down.

Lift up the zipper, as if you were pulling the zipper closed.

1024

Step 2

  • Insert the zipper pull into the smaller hole in the zipper. This is the top hole when the zipper is hanging normally.
  • Pull the zipper pull through the smaller hole.

Insert the zipper pull into the smaller hole in the zipper. This is the top hole when the zipper is hanging normally.

Pull the zipper pull through the smaller hole.

Step 3

  • Rest the zipper back in its normal, hanging position.
  • Take top end of the zipper pull and insert it into the bigger, lower hole in the zipper.

Rest the zipper back in its normal, hanging position.

Take top end of the zipper pull and insert it into the bigger, lower hole in the zipper.

Step 4

  • Pull the top of the zipper pull through the hole to create a loop on the backside of the zipper.
  • Bring the zipper pull-tab through the loop.

Pull the top of the zipper pull through the hole to create a loop on the backside of the zipper.

Bring the zipper pull-tab through the loop.

Step 5

  • Pull the zipper pull-tab snug.
  • The zipper pull should now be inserted and lay flat.

Pull the zipper pull-tab snug.

The zipper pull should now be inserted and lay flat.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.

Author

                                      with 3 other contributors 


                    Brittany McCrigler

Member since: 03/05/2012

87,796 Reputation

                                      132 Guides authored                  



                       Badges:
                       48







                                                        +45 more badges

Kathleen Hutton - Apr 24, 2020

Reply

Awesome! Thanks for the training!