Difficulty
Easy
Steps
3
Time Required
5 - 10 minutes
Sections
1
- Antenna
- 3 steps
Flags
0
BackRadio
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Antenna
- To remove the back panel from the Weather radio, use your index finger and push down on the tab located on the back.
To remove the back panel from the Weather radio, use your index finger and push down on the tab located on the back.
1024
Step 2
- Use a Phillips 1X80 screwdriver to loosen the screw located on the bottom right of the back panel.
- Do not attempt to remove the screw because it will not come out.
Use a Phillips 1X80 screwdriver to loosen the screw located on the bottom right of the back panel.
Do not attempt to remove the screw because it will not come out.
Step 3
- Once the screw is loose, slowly pull out the antenna until it is completely out.
- Once the antenna is out, you can replace it with the new one.
- Do not force the antenna inside and make sure it is coiled all the way down.
Once the screw is loose, slowly pull out the antenna until it is completely out.
Once the antenna is out, you can replace it with the new one.
Do not force the antenna inside and make sure it is coiled all the way down.
After following these steps, the Realistic Weatheradio should be able to work and function normally.
Cancel: I did not complete this guide.
2 other people completed this guide.
Attached Documents
- Realistic-Weatheradio.pdf
- PDF - 27.32 kb
- View
Realistic-Weatheradio.pdf
PDF - 27.32 kb
Author
with 5 other contributors
Matthew
Member since: 07/17/2015
136 Reputation
1 Guide authored
Badges:
6
+3 more badges
Team
Texas Tech, Team 3-5, Rauch SU 2015
Member of Texas Tech, Team 3-5, Rauch SU 2015
TTU-RAUCH-SU15S3G5
3 Members
1 Guide authored