Replacing Coffee Spout Manifold On Melitta Caffeo Solo Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          10 minutes            

Sections

1

• Coffee Spout Manifold
• 3 steps

Flags

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackMelitta Caffeo Solo

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Coffee Spout Manifold               

• The glossy cover over the coffee spout is only snapped into place.
• At the cover bottom you will find a tab in the middle above a catch. Lift the tab a little with a flat screwdriver and detach it from the catch.
• Lift up the cover.

The glossy cover over the coffee spout is only snapped into place.

At the cover bottom you will find a tab in the middle above a catch. Lift the tab a little with a flat screwdriver and detach it from the catch.

Lift up the cover.

1024

Step 2

• The coffee spout distributor is only snapped into place. Use your fingers to grab it from the top and lift it away from the machine. The first time it may stick pretty tight.

The coffee spout distributor is only snapped into place. Use your fingers to grab it from the top and lift it away from the machine. The first time it may stick pretty tight.

Step 3

• Remove the chrome trim from the outlet nozzles.
• Slide off the inlet hose.

Remove the chrome trim from the outlet nozzles.

Slide off the inlet hose.

Repeat the steps in reverse order to reassemble the device.

Cancel: I did not complete this guide.

                                                                                      12 other people completed this guide.                                             


        VauWeh is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

VauWeh

Author

                                      with 2 other contributors 

                    VauWeh                     

Member since: 10/19/2015

160,518 Reputation

                                      211 Guides authored                  



                       Badges:
                       41







                                                        +38 more badges                           

Thomas Bousonville - Jan 22, 2022

Reply

Hallo, besten Dank für die Tipps, damit habe ich es geschafft. Bei Schritt 2 würde ich eher sagen den Kaffeeauslaufverteiler nach => vorne rausziehen. Spülen geht auch, man muss nicht unbedingt ein Ersatzteil bestellen. Ist aber sicher irgendwann hygienischer und der Kaffee wird von den festsitzenden Resten im Verteiler ja auch nicht besser!

Pieter Hooijmans - May 8, 2022

Reply

Very useful, thanks for the explanation. Getting the cover off was most difficult, the rest was easy. Cleaning the manifold with soda works perfectly, no need to replace.

karl.lucas - Jun 26, 2022

Reply

Der Ausbau war in der Ausbauanleitung sehr gut beschrieben. Ein Neukauf des Verteilers war nicht notwendig. Ich habe durch die beiden Ablaufdüsen mit einem feinen Wasserstrahl den Verteilerbehälter mehrfach ausgespült bis kein Kaffeesatz mehr rauslief. Die beiden Kaffeeablaufdüsen laufen wieder gleichmäßig.