Difficulty
Easy
Steps
3
Time Required
1 - 3 minutes
Sections
1
- Battery
- 3 steps
Flags
0
BackDS
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Battery
- Remove the cartridge from the console.
- Use a Phillips #00 Screwdriver to remove the screw securing the battery door to the rear case.
- Remove the battery door.
- In the images, it shows that the fixer is using a flathead screwdriver. This flathead screwdriver will work just like the Phillips #00 Screwdriver.
Remove the cartridge from the console.
Use a Phillips #00 Screwdriver to remove the screw securing the battery door to the rear case.
Remove the battery door.
In the images, it shows that the fixer is using a flathead screwdriver. This flathead screwdriver will work just like the Phillips #00 Screwdriver.
1024
Step 2
- Use a plastic opening tool or spudger to pry out the battery from the bottom. If a plastic opening tool or spudger isn’t available, your fingernails may work.
Use a plastic opening tool or spudger to pry out the battery from the bottom. If a plastic opening tool or spudger isn’t available, your fingernails may work.
Step 3
- Remove the battery from the Nintendo DS.
Remove the battery from the Nintendo DS.
Make sure to press the power button on the Nintendo DS when finished to confirm the battery is working.
Cancel: I did not complete this guide.
10 other people completed this guide.
Author
with 17 other contributors
dnguye26
Member since: 10/28/2009
676 Reputation
4 Guides authored
Badges:
13
+10 more badges
Team
Cal Poly, Team 18-3, Maness Fall 2009
Member of Cal Poly, Team 18-3, Maness Fall 2009
CPSU-MANESS-F09S18G3
4 Members
20 Guides authored