Replacing Nokia X3 02 Lcd Repair Guide

Difficulty

Moderate

Steps

4

Time Required

                          10 - 20 minutes            

Sections

1

• LCD
• 4 steps

Flags

2

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackNokia X3

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              LCD               

• Before disassembling your phone, be sure it is powered off.
• To remove the back cover press the two “buttons”.
• Remove the battery.

Before disassembling your phone, be sure it is powered off.

To remove the back cover press the two “buttons”.

Remove the battery.

1024

Step 2

• Remove the three 3mm black screws on the top of the phone.
• Remove the two 5mm screws.
• Loosen these two screws at the bottom of the phone.
• Probably these screws will not come out from their home, no matter. It is only important to unscrew them completely.

Remove the three 3mm black screws on the top of the phone.

Remove the two 5mm screws.

Loosen these two screws at the bottom of the phone.

Probably these screws will not come out from their home, no matter. It is only important to unscrew them completely.

Step 3

• With a plastic opening tool remove the little piece of plastic in the bottom of of the phone.
• The two corners marked are VERY SLENDER, when removing the plastic be very careful. Otherwise you will break them.
• To remove the logic board assembly push from the rear of the phone.

With a plastic opening tool remove the little piece of plastic in the bottom of of the phone.

The two corners marked are VERY SLENDER, when removing the plastic be very careful. Otherwise you will break them.

To remove the logic board assembly push from the rear of the phone.

Step 4

• Remove the keyboard with a plastic opening tool.

Remove the keyboard with a plastic opening tool.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      13 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Matteo Moro                     

Member since: 02/21/2013

536 Reputation

                                      1 Guide authored                  



                       Badges:
                       12







                                                        +9 more badges