Replacing Sonos Play 1 Power And Volume Switch Board Repair Guide

Difficulty

Easy

Steps

Time Required

                          8 - 10 minutes

Sections

Exterior Screen
5 steps
Sonos Play 1 Top Cover Disassembly
3 steps
Power and Volume Switch Board
2 steps

Flags

BackSonos Play 1
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Exterior Screen

Remove the rubber footing from the bottom of the device. Pry it up from one end using one of the plastic opening tools.
Once you pry open one end, use precision tweezers to remove rubber footing.

Remove the rubber footing from the bottom of the device. Pry it up from one end using one of the plastic opening tools.

Once you pry open one end, use precision tweezers to remove rubber footing.

1024

Step 2

Using a metal spudger, pry open a corner of the adhesive tape.
Use precision tweezers to remove the adhesive tape.

Using a metal spudger, pry open a corner of the adhesive tape.

Use precision tweezers to remove the adhesive tape.

Step 3

Remove the four 10 mm Torx security #10 screws that hold the base together.
Remove the base by lifting it vertically away from the bulk of the device.

Remove the four 10 mm Torx security #10 screws that hold the base together.

Remove the base by lifting it vertically away from the bulk of the device.

Step 4

Remove the 10 mm Torx security #10 screw that holds down the exterior screen.
Using precision tweezers, remove the metal bracket.

Remove the 10 mm Torx security #10 screw that holds down the exterior screen.

Using precision tweezers, remove the metal bracket.

Step 5

Remove the exterior screen by lifting it away from the bulk of the device.

Remove the exterior screen by lifting it away from the bulk of the device.

Step 6

              Sonos Play 1 Top Cover Disassembly

Remove the four 9 mm Torx Security #9 head screws. There are two on each side.

Remove the four 9 mm Torx Security #9 head screws. There are two on each side.

Step 7

Using a plastic opening tool, pry open the top cap containing the power and volume button.
Vertically remove the top cap.
Be sure to not jerk the top cap when removing , as to not damage the cable linking the switchboard to the motherboard.

Using a plastic opening tool, pry open the top cap containing the power and volume button.

Vertically remove the top cap.

Be sure to not jerk the top cap when removing , as to not damage the cable linking the switchboard to the motherboard.

Step 8

Using a plastic opening tool, pry open the circuit flap.
Once flap is loosened, use your hand to remove the circuit wire.

Using a plastic opening tool, pry open the circuit flap.

Once flap is loosened, use your hand to remove the circuit wire.

Step 9

              Power and Volume Switch Board

Using a screwdriver with a Torx T6 bit, remove the four highlighted 7mm screws.
Using you fingers remove the protective plastic plate covering the device.

Using a screwdriver with a Torx T6 bit, remove the four highlighted 7mm screws.

Using you fingers remove the protective plastic plate covering the device.

Step 10

Using your fingers remove the plastic cover plate securing the switchboard.
Using your fingers, remove the power/volume switch board.

Using your fingers remove the plastic cover plate securing the switchboard.

Using your fingers, remove the power/volume switch board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.

Author

                                      with 4 other contributors

                    Patty

Member since: 09/01/2015

434 Reputation

                                      1 Guide authored                  



                       Badges:
                       14







                                                        +11 more badges

Team

                       USF Tampa, Team 8-4, Eyestone Fall 2015                        

                                                  Member of USF Tampa, Team 8-4, Eyestone Fall 2015 



                    USFT-EYESTONE-F15S8G4                     


                                            4 Members                     


                                            15 Guides authored

Teresa Rosales - Nov 15, 2016

Where can I get the replacement power button?

hung pham - Feb 11, 2018

I would like to know as well

Kenneth - Dec 26, 2018

Dear Patty

Where can I buy the switchboard?

Thanks in advance. :-)

/Kenneth

Lars Jürgensen - Mar 28, 2019

Same quesion here from DK

craigmdyer - Apr 26, 2020

where can i find board

Introduction#

What you need#

Team#

Introduction

What you need

Team