Replacing The Podz Port Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 - 15 minutes            

Sections

1

• Rear Cover PODZ Port
• 7 steps

Flags

2

Markup Mishap

This guide needs better markups. Help out by correcting or making some markup annotations.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

• BackIon Air Pro

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Rear Cover PODZ Port               

• Remove the 6 screws securing the lens cover bezel using a #00 Phillips screwdriver. This will allow you to remove the bezel and lens cover.

Remove the 6 screws securing the lens cover bezel using a #00 Phillips screwdriver. This will allow you to remove the bezel and lens cover.

1024

Step 2

• Remove the metal camera body cover by sliding it toward the lens end of the camera.

Remove the metal camera body cover by sliding it toward the lens end of the camera.

Step 3

• Remove 2 screws on the bottom of the camera body using a #00 Phillips screwdriver.

Remove 2 screws on the bottom of the camera body using a #00 Phillips screwdriver.

Step 4

• Remove the 3 screws that secure the camera to the body using a #00 Phillips screwdriver.

Remove the 3 screws that secure the camera to the body using a #00 Phillips screwdriver.

Step 5

• Use a plastic pry tool to remove the plastic ring covering the rear screws.

Use a plastic pry tool to remove the plastic ring covering the rear screws.

Step 6

• Remove the 8 screws around the perimeter of the back cover.
• Remove the 2 screws in the PODZ port.

Remove the 8 screws around the perimeter of the back cover.

Remove the 2 screws in the PODZ port.

Step 7

• Slide PODZ port out of the camera body.
• Disconnect ribbon cable from the back of the PODZ port.

Slide PODZ port out of the camera body.

Disconnect ribbon cable from the back of the PODZ port.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Christopher Brandl                     

Member since: 10/09/2018

673 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       UW Stout, Team S6-G2, Ogden Fall 2018                        

                                                  Member of UW Stout, Team S6-G2, Ogden Fall 2018 



                    UWSTOUT-OGDEN-F18S6G2                     


                                            4 Members                     


                                            5 Guides authored                     

Peter Niepel - May 7, 2019

Reply

How do you reconnect the ribbon cable to the back of the PODZ port when you reassemble?