Replacing The Wi Fi Module On Why W253Eu Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 minutes            

Sections

3

• Battery from why! Remove W253EU
• 1 step
• Access to RAM and CPU from why! W253EU
• 3 steps
• Wi-Fi Module
• 1 step

Flags

2

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

Better Introduction

Improve this guide by completing or revising its introduction.

• Backwhy! W253EU

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Step 1

              Battery from why! Remove W253EU               

• Turn off the computer.
• Before each operation it is important to start with the removal of the accumulator.
• Take the slide unlocked into position, remove the battery.

Turn off the computer.

Before each operation it is important to start with the removal of the accumulator.

Take the slide unlocked into position, remove the battery.

1024

Step 2

              Access to RAM and CPU from why! W253EU               

• Using a Philips #1 screwdriver, unscrew the 5 screws securing the cover.

Using a Philips #1 screwdriver, unscrew the 5 screws securing the cover.

Step 3

• Push the screwdriver a few millimeters under the cover so that it can be touched with your fingers.
• Now lift the cover carefully.
• Attention! Disconnect the ventillator cable so that the cover can be completely removed (see next step).

Push the screwdriver a few millimeters under the cover so that it can be touched with your fingers.

Now lift the cover carefully.

Attention! Disconnect the ventillator cable so that the cover can be completely removed (see next step).

Step 4

• Since the ventillator is mounted under the cover, its power supply cable must first be disconnected so that the cover can then be completely removed.

Since the ventillator is mounted under the cover, its power supply cable must first be disconnected so that the cover can then be completely removed.

Step 5

              Wi-Fi Module               

• Using a Phillips #1 screwdriver, remove the two screws securing the Wi-Fi module.

Using a Phillips #1 screwdriver, remove the two screws securing the Wi-Fi module.

Follow these steps in reverse order to reassemble your device

Cancel: I did not complete this guide.

        oldturkey03 is helping us fix the world!      Want to contribute?      Start translating › 

Special thanks to these translators:

100%

oldturkey03

Author

                                      with 2 other contributors 

                    Felice Suglia                     

Member since: 06/15/2013

28,552 Reputation

                                      243 Guides authored                  



                       Badges:
                       20







                                                        +17 more badges