Difficulty
Easy
Steps
4
Time Required
10 minutes
Sections
1
- Heater Plate Fuse
- 4 steps
Flags
0
BackResMed AirSense 10
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Heater Plate Fuse
- With medium pressure, place your thumb on the top of the tank and four fingers on the bottom.
- Pull straight out on the tank until it releases from the device.
With medium pressure, place your thumb on the top of the tank and four fingers on the bottom.
Pull straight out on the tank until it releases from the device.
1024
Step 2
- Remove the four 10mm screws from the bottom of the device with a Torx T10 screwdriver.
Remove the four 10mm screws from the bottom of the device with a Torx T10 screwdriver.
Step 3
- After the plastic cover has been removed you will be able to see the back of the heater plate. We will remove it from the device to making it easier to remove the fuse.
- Pinching the three red cords, pull straight back on the heater plate power cord until it is removed from the connector.
- After the cord has been removed from the connector, it will need to be pulled through the rubber grommet.
- Gently pull the wires to the connector until the white connector is touching the rubber grommet.
- Using light force, push the white connector on the end of the heater plate power cords through the rubber grommet.
After the plastic cover has been removed you will be able to see the back of the heater plate. We will remove it from the device to making it easier to remove the fuse.
Pinching the three red cords, pull straight back on the heater plate power cord until it is removed from the connector.
After the cord has been removed from the connector, it will need to be pulled through the rubber grommet.
Gently pull the wires to the connector until the white connector is touching the rubber grommet.
Using light force, push the white connector on the end of the heater plate power cords through the rubber grommet.
Step 4
- Using the straight tipped tweezers, push the fuse away from fuse housing until the main body of the fuse is visible.
- Take the straight tipped tweezers, grip the body of the fuse, and pull it free from the housing.
- Make sure to not bend the wire of the fuse. Using the holes of the housing as a guide will allow you to put the fuse back in the correct orientation.
Using the straight tipped tweezers, push the fuse away from fuse housing until the main body of the fuse is visible.
Take the straight tipped tweezers, grip the body of the fuse, and pull it free from the housing.
Make sure to not bend the wire of the fuse. Using the holes of the housing as a guide will allow you to put the fuse back in the correct orientation.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
8 other people completed this guide.
Author
with 4 other contributors
Graham Michael Holland
Member since: 09/25/2020
197 Reputation
1 Guide authored
Badges:
11
+8 more badges
Team
The Citadel Military College of South Carolina, Team S1-G6, Eggleston Fall 2020
Member of The Citadel Military College of South Carolina, Team S1-G6, Eggleston Fall 2020
CMCSC-EGGLESTON-F20S1G6
3 Members
6 Guides authored
pnreinhard - Jan 3, 2021
Reply
Where can I buy a new fuse? This one does not look like one I can get at a hardware store.
mustdeliver - Jan 26, 2021
Reply
Yws, please, where can we buy a new fuse? Thanks.
citycountryboi53 - Apr 8, 2021
Reply
and yes where do you buy a fuse can’t find no where PLEASE @ cityboi53@yahoo.com
Wally Petrey - May 8, 2021
Did you get a reply as to where you can buy the fuse?
andres usma - Jun 15, 2021
Reply
any idea how can i get the fuse what are the specs and where can i buy one or someone know where to get the whole heating plate
