Difficulty
Moderate
Steps
6
Time Required
1 hour
Sections
1
- Blower Unit
- 6 steps
Flags
0
BackResMed VPAP Auto 25
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Blower Unit
- Remove the four 26.7 mm T3 Torx screws from the bottom side of the ResMed VPAP Auto 25.
Remove the four 26.7 mm T3 Torx screws from the bottom side of the ResMed VPAP Auto 25.
1024
Step 2
- Flip the device over.
- Pry the outermost plastic cover off with the metal spudger until the cover is loose and able to be removed.
Flip the device over.
Pry the outermost plastic cover off with the metal spudger until the cover is loose and able to be removed.
Step 3
- Pull off the front cover to reveal the internal components.
Pull off the front cover to reveal the internal components.
Step 4
- Loosen the motherboard from the rubber dowels holding it in place and unplug the screen components.
Loosen the motherboard from the rubber dowels holding it in place and unplug the screen components.
Step 5
- Remove the three 26.7 mm T3 Torx screws from the now visible rubber fan motor cover.
- Lift off the rubber fan motor cover, revealing the fan motor.
Remove the three 26.7 mm T3 Torx screws from the now visible rubber fan motor cover.
Lift off the rubber fan motor cover, revealing the fan motor.
Step 6
- Unplug the blower unit cable.
- Remove the fan motor blower unit.
Unplug the blower unit cable.
Remove the fan motor blower unit.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Camille Simmons
Member since: 09/17/2020
133 Reputation
1 Guide authored
Badges:
2
Team
The Citadel Military College of South Carolina, Team S3-G17, Eggleston Fall 2020
Member of The Citadel Military College of South Carolina, Team S3-G17, Eggleston Fall 2020
CMCSC-EGGLESTON-F20S3G17
3 Members
4 Guides authored
ed allen - Dec 17, 2022
Reply
where can we get a new motor?