Respironics Remstar Plus M Series Power Supply Circuit Board Replacement Repair Guide

Difficulty

Moderate

Steps

3

Time Required

                          20 minutes            

Sections

1

• Power Supply Circuit board
• 3 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackRespironics REMstar Plus M Series

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Power Supply Circuit board               

• Place the device face down.
• Use a T15 Torx screwdriver to remove the six screws in the base plate.
• Lift the base plate off of the device.

Place the device face down.

Use a T15 Torx screwdriver to remove the six screws in the base plate.

Lift the base plate off of the device.

1024

Step 2

• Flip the circuit board over to the right.
• Gently pull the ribbon cable outward to disconnect it from the circuit board.

Flip the circuit board over to the right.

Gently pull the ribbon cable outward to disconnect it from the circuit board.

Step 3

• Disconnect the red 3-wire plug at the top left of the board and the white 4-wire plug at the bottom left.
• Remove the circuit board.

Disconnect the red 3-wire plug at the top left of the board and the white 4-wire plug at the bottom left.

Remove the circuit board.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Brent Forrest                     

Member since: 09/17/2020

169 Reputation

                                      2 Guides authored                  



                       Badges:
                       2

Team

                       The Citadel Military College of South Carolina, Team S3-G22, Eggleston Fall 2020                        

                                                  Member of The Citadel Military College of South Carolina, Team S3-G22, Eggleston Fall 2020 



                    CMCSC-EGGLESTON-F20S3G22                     


                                            2 Members                     


                                            3 Guides authored                     

mert454 - Aug 18, 2022

Reply

My unit stops working in the middle of the night, then beeps, & blue light flashes. Will replacing this board fix this, and where can I get one?