Retro Bit Retro Duo Cartridge Doors Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 minutes            

Sections

1

• Cartridge Doors
• 5 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

• BackRetro-Bit Retro Duo

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Cartridge Doors               

• With the console on its top. Remove the four 12 mm Phillips #2 screws.
• There may be a sticker covering one or more of the screws. Remove it before the screws.
• Flip the console on its feet, pinch near the AV/S ports, and carefully lift the top casing.
• Do not completely remove the top casing. There is a small LED circuit board connected to the main circuit board.

With the console on its top. Remove the four 12 mm Phillips #2 screws.

There may be a sticker covering one or more of the screws. Remove it before the screws.

Flip the console on its feet, pinch near the AV/S ports, and carefully lift the top casing.

Do not completely remove the top casing. There is a small LED circuit board connected to the main circuit board.

1024

Step 2

• Remove the one 6 mm Phillips #0 screw.
• Lift the top case and set aside.

Remove the one 6 mm Phillips #0 screw.

Lift the top case and set aside.

Step 3

• Remove the eight 10 mm Phillips #0 screws.
• The cartridge doors are spring-loaded and may pop up.

Remove the eight 10 mm Phillips #0 screws.

The cartridge doors are spring-loaded and may pop up.

Step 4

• Carefully lift the cartridge door case and set aside.

Carefully lift the cartridge door case and set aside.

Step 5

• Take the cartridge doors out of the top casing.
• Keep the correct cartridge doors together. Note the door numbers and position.
• Doors numbered two and four are for NES cartridges.
• Doors numbered three are for SNES cartridges.

Take the cartridge doors out of the top casing.

Keep the correct cartridge doors together. Note the door numbers and position.

Doors numbered two and four are for NES cartridges.

Doors numbered three are for SNES cartridges.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Truong Vo                     

Member since: 09/25/2017

320 Reputation

                                      3 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       USF Tampa, Team S4-G4, Eyestone Fall 2017                        

                                                  Member of USF Tampa, Team S4-G4, Eyestone Fall 2017 



                    USFT-EYESTONE-F17S4G4                     


                                            3 Members                     


                                            10 Guides authored