Revlon Rvir1008 Barrel Shell Replacement Repair Guide

Difficulty

Easy

Steps

Time Required

                          5 minutes

Sections

Barrel Shell
7 steps

Flags

BackRevlon RVIR1008
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

What you need

Step 1

              Barrel Shell

Place curling iron on a flat surface along with required tools and barrel shell replacement.
Curling iron is extremely hot after use. Carefully unplug and let device sit and cool to room temperature before proceeding.

Place curling iron on a flat surface along with required tools and barrel shell replacement.

Curling iron is extremely hot after use. Carefully unplug and let device sit and cool to room temperature before proceeding.

1024

Step 2

Using both hands, carefully detach both ends of the metal stand from the body of the iron by pulling away from the barrel.

Using both hands, carefully detach both ends of the metal stand from the body of the iron by pulling away from the barrel.

Step 3

Unscrew the 3mm screws from both sides of the barrel clip with a 3.0 flathead screwdriver to remove the clip from the barrel.
Set the two screws and barrel clip aside for reassembly.
Clip is prone to pop off from the body due to the weight of the spring. To prevent this, equally loosen each screw little by little.

Unscrew the 3mm screws from both sides of the barrel clip with a 3.0 flathead screwdriver to remove the clip from the barrel.

Set the two screws and barrel clip aside for reassembly.

Clip is prone to pop off from the body due to the weight of the spring. To prevent this, equally loosen each screw little by little.

Step 4

Squeeze both sides of the barrel clip spring and slide the component away from the barrel to remove.
Slowly decompress the spring after removal from the spring plate to avoid any hazards.

Squeeze both sides of the barrel clip spring and slide the component away from the barrel to remove.

Slowly decompress the spring after removal from the spring plate to avoid any hazards.

Step 5

Remove 3mm screw holding the metal spring plate in place with the 3.0 flathead screwdriver.
Place the screw and plate to the side for later reassembly.
Removing the screw allows for removal of the barrel from the iron itself. Be sure not to pull the barrel.

Remove 3mm screw holding the metal spring plate in place with the 3.0 flathead screwdriver.

Place the screw and plate to the side for later reassembly.

Removing the screw allows for removal of the barrel from the iron itself. Be sure not to pull the barrel.

Step 6

Remove the two screws holding the plastic casing together using the 3.0 flathead screwdriver.
Remove the front plastic cover from the main body.
The plastic cover contains warnings and is located on the devices handle.
Once completed, the internal parts of the iron will be exposed.
Place the two screws and plastic cover to the side for later reassembly.

Remove the two screws holding the plastic casing together using the 3.0 flathead screwdriver.

Remove the front plastic cover from the main body.

The plastic cover contains warnings and is located on the devices handle.

Once completed, the internal parts of the iron will be exposed.

Place the two screws and plastic cover to the side for later reassembly.

Step 7

Remove the cylindrical barrel shell by sliding it away from the devices main heating element. wisdom here.
Retrieve replacement barrel shell and slide it onto the devices main heating element.
Be careful to grip the device firmly and precisely to avoid stripping away the internal components underneath the handle.

Remove the cylindrical barrel shell by sliding it away from the devices main heating element. wisdom here.

Retrieve replacement barrel shell and slide it onto the devices main heating element.

Be careful to grip the device firmly and precisely to avoid stripping away the internal components underneath the handle.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Cassidy Madrigal

Member since: 04/10/2017

113 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge

Team

                       UW Tacoma, Team S3-G2, Liner Spring 2017                        

                                                  Member of UW Tacoma, Team S3-G2, Liner Spring 2017 



                    UWT-LINER-S17S3G2                     


                                            3 Members                     


                                            2 Guides authored

What you need#

Team#

What you need

Team