Revlon Rvir1008 Disassembly Repair Guide

Difficulty

Easy

Steps

11

Time Required

                          10 - 25 minutes            

Sections

1

• Revlon RVIR1008 Disassembly
• 11 steps

Flags

3

Incorrect Tools

Help make this guide better by using the correct tools in images and/or text.

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Member-Contributed Guide

An awesome member of our community made this guide. It is not managed by iFixit staff.

• BackRevlon RVIR1008

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Revlon RVIR1008 Disassembly               

• Be sure your curling iron is removed from the electrical outlet. Failure to unplug may result in electric shock and/or damage to the curling iron.
• Place the curling iron on a clean, flat surface.

Be sure your curling iron is removed from the electrical outlet. Failure to unplug may result in electric shock and/or damage to the curling iron.

Place the curling iron on a clean, flat surface.

1024

Step 2

              Remove the metal stand.               

• Use your fingers to pull the ends of the stand away from the barrel. The metal stand should be easy to pry from the sides of the barrel.

Use your fingers to pull the ends of the stand away from the barrel. The metal stand should be easy to pry from the sides of the barrel.

Step 3

              Remove the barrel clip.               

• Using a 3mm Flathead screwdriver, slowly remove both screws from the sides of the barrel clip.
• Take turns unscrewing each screw . The clip is operated by a tight metal spring. Completely removing one screw first makes it difficult to unscrew the second screw.

Using a 3mm Flathead screwdriver, slowly remove both screws from the sides of the barrel clip.

Take turns unscrewing each screw . The clip is operated by a tight metal spring. Completely removing one screw first makes it difficult to unscrew the second screw.

Step 4

              Remove the clip spring.               

• Using two fingers, squeeze either side of the spring and slide the ends away from the barrel.

Using two fingers, squeeze either side of the spring and slide the ends away from the barrel.

Step 5

              Remove the spring plate               

• Using a 3mm Flathead Screwdriver, remove the screw holding the spring plate in place.

Using a 3mm Flathead Screwdriver, remove the screw holding the spring plate in place.

Step 6

              Remove the bottom of the handle.               

• Using a 3mm Flathead Screwdriver, remove the 27mm screw on the left and the 15mm screw on the right.
• When reassembling the curling iron, make sure to put the screws in their respective holes.
• Once the screws are removed, the bottom plate easily comes off, exposing the inner components of the iron.

Using a 3mm Flathead Screwdriver, remove the 27mm screw on the left and the 15mm screw on the right.

When reassembling the curling iron, make sure to put the screws in their respective holes.

Once the screws are removed, the bottom plate easily comes off, exposing the inner components of the iron.

Step 7

              Remove the barrel shell.               

• To remove the barrel, simply side the silver outer shell away from the inner heat transfer element.
• The inner heat transfer element is attached to multiple AC power wires. When removing the barrel shell, make sure the inner heating element is not pulled away from the rest of the iron or the wires may tear off.

To remove the barrel, simply side the silver outer shell away from the inner heat transfer element.

The inner heat transfer element is attached to multiple AC power wires. When removing the barrel shell, make sure the inner heating element is not pulled away from the rest of the iron or the wires may tear off.

Step 8

              Remove the top of the handle.               

• Using your hands, slowly pull the inner components away from the top of the handle.

Using your hands, slowly pull the inner components away from the top of the handle.

Step 9

              Remove the swivel cord.               

• Using your hands, slowly pull the cord away from the socket. The cord should easily slide out of the socket.

Using your hands, slowly pull the cord away from the socket. The cord should easily slide out of the socket.

Step 10

              Remove the temperature dials.               

• Using two hands, grab each wheel and pull the temperature dials away from the circuit board.

Using two hands, grab each wheel and pull the temperature dials away from the circuit board.

Step 11

              You did it!               

• You have successfully completed the disassembly! Follow these steps in reverse to reassemble your curling iron.

You have successfully completed the disassembly! Follow these steps in reverse to reassemble your curling iron.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 

                    Kelsea                     

Member since: 09/15/2015

190 Reputation

                                      1 Guide authored                  



                       Badges:
                       4







                                                        +1 more badge