Difficulty

Easy

Steps

4

Time Required

                          8 - 10 minutes

Sections

1

  • Film Cartridge Hooks
  • 4 steps

Flags

Better Introduction

Improve this guide by completing or revising its introduction.

  • BackRicoh Super 8 800z

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Film Cartridge Hooks
  • Open the device’s film cartridge door by pulling the release switch towards the eyepiece.
  • Lay the device with the left side down and the door open to allow access to the film cartridge hooks.

Open the device’s film cartridge door by pulling the release switch towards the eyepiece.

Lay the device with the left side down and the door open to allow access to the film cartridge hooks.

1024

Step 2

  • Using a Phillips #000 screwdriver, remove one of the screws from the rotating hooks in the center of the film bay.
  • Be sure to hold down the opposite side of the hooks with a finger to prevent it from spinning.

Using a Phillips #000 screwdriver, remove one of the screws from the rotating hooks in the center of the film bay.

Be sure to hold down the opposite side of the hooks with a finger to prevent it from spinning.

Step 3

  • Now put your finger on the side of the screw you just removed, and take out the remaining screw with a Phillips #000 screwdriver.

Now put your finger on the side of the screw you just removed, and take out the remaining screw with a Phillips #000 screwdriver.

Step 4

  • Using your fingers, gently remove the film cartridge hooks.

Using your fingers, gently remove the film cartridge hooks.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    carlos enrique

Member since: 01/30/2020

317 Reputation

                                      2 Guides authored                  



                       Badges:
                       6







                                                        +3 more badges

Team

                       Embry-Riddle Aeronautical University, Team S17-G10, Lamothe Spring 2020                        

                                                  Member of Embry-Riddle Aeronautical University, Team S17-G10, Lamothe Spring 2020 



                    ERAU-LAMOTHE-S20S17G10                     


                                            4 Members                     


                                            10 Guides authored