Ridgid Angle Grinder R10202 Disk Guard Spring Replacement Repair Guide

Difficulty

Moderate

Steps

Time Required

                          3 - 6 minutes

Sections

Disk Guard Spring
4 steps

Flags

BackRidgid Angle Grinder R10202
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications

Introduction

What you need

Step 1

              Disk Guard Spring

Unscrew the clamp nut and the backing flange from the output shaft assembly.
You can do this by hand or use a spanner wrench which should be provided in the manufacturers box.

Unscrew the clamp nut and the backing flange from the output shaft assembly.

You can do this by hand or use a spanner wrench which should be provided in the manufacturers box.

1024

Step 2

Push in the guard lever and twist the guard until it aligns with the slots on the output shaft assembly.
There are two arrows that should align before you attempt to pull the pieces apart.

Push in the guard lever and twist the guard until it aligns with the slots on the output shaft assembly.

There are two arrows that should align before you attempt to pull the pieces apart.

Step 3

Unscrew the 5 M5 X 10mm screws using a Torx T20 Bit.
Carefully separate the spacer from the guard.

Unscrew the 5 M5 X 10mm screws using a Torx T20 Bit.

Carefully separate the spacer from the guard.

Step 4

Gently push the spring away from the spacer.
The spacer, spring, and guard lever should now be all separate.

Gently push the spring away from the spacer.

The spacer, spring, and guard lever should now be all separate.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors

                    Parker Massie

Member since: 01/10/2019

607 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Oregon Institute of Technology, Team S1-G2, Lancaster Winter 2019                        

                                                  Member of Oregon Institute of Technology, Team S1-G2, Lancaster Winter 2019 



                    OIT-LANCASTER-W19S1G2                     


                                            4 Members                     


                                            6 Guides authored

Introduction#

What you need#

#

#

#

#

#

#

Team#

#

Introduction

What you need

Team