Difficulty
Moderate
Steps
8
Time Required
5 - 10 minutes
Sections
1
- Ridgid Angle Grinder R10202 Handle Disassembly
- 8 steps
Flags
0
BackRidgid Angle Grinder R10202
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Ridgid Angle Grinder R10202 Handle Disassembly
- Using a Torx T20 screwdriver, unscrew the five M5 x 16 mm screws.
- Using the T20 screwdriver, remove the M5 x 28 mm screw.
Using a Torx T20 screwdriver, unscrew the five M5 x 16 mm screws.
Using the T20 screwdriver, remove the M5 x 28 mm screw.
1024
Step 2
- Using a Torx T10 screwdriver, remove the M3 x 10mm screw.
Using a Torx T10 screwdriver, remove the M3 x 10mm screw.
Step 3
- Gently pull off the right side handle.
Gently pull off the right side handle.
Step 4
- Using a hex head screwdriver, remove the two 8-16 x 1/2in screws.
Using a hex head screwdriver, remove the two 8-16 x 1/2in screws.
Step 5
- Gently pull away the bend relief.
Gently pull away the bend relief.
Step 6
- Remove the one M4 x 14 mm screw using a Phillips screwdriver.
Remove the one M4 x 14 mm screw using a Phillips screwdriver.
Step 7
- Gently lift away the switch and wires.
Gently lift away the switch and wires.
Step 8
- Press down the handle lock button.
- Force-ably twist and pull away the left side handle assembly.
Press down the handle lock button.
Force-ably twist and pull away the left side handle assembly.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
One other person completed this guide.
Author
with 3 other contributors
Parker Massie
Member since: 01/10/2019
607 Reputation
4 Guides authored
Badges:
8
+5 more badges
Team
Oregon Institute of Technology, Team S1-G2, Lancaster Winter 2019
Member of Oregon Institute of Technology, Team S1-G2, Lancaster Winter 2019
OIT-LANCASTER-W19S1G2
4 Members
6 Guides authored
