Difficulty

Moderate

Steps

10

Time Required

                          20 minutes

Sections

2

  • Ridgid Angle Grinder R10202 Handle Disassembly
  • 8 steps
  • Power Trigger
  • 2 steps

Flags

0

  • BackRidgid Angle Grinder R10202

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Ridgid Angle Grinder R10202 Handle Disassembly
  • Using a Torx T20 screwdriver, unscrew the five M5 x 16 mm screws.
  • Using the T20 screwdriver, remove the M5 x 28 mm screw.

Using a Torx T20 screwdriver, unscrew the five M5 x 16 mm screws.

Using the T20 screwdriver, remove the M5 x 28 mm screw.

1024

Step 2

  • Using a Torx T10 screwdriver, remove the M3 x 10mm screw.

Using a Torx T10 screwdriver, remove the M3 x 10mm screw.

Step 3

  • Gently pull off the right side handle.

Gently pull off the right side handle.

Step 4

  • Using a hex head screwdriver, remove the two 8-16 x 1/2in screws.

Using a hex head screwdriver, remove the two 8-16 x 1/2in screws.

Step 5

  • Gently pull away the bend relief.

Gently pull away the bend relief.

Step 6

  • Remove the one M4 x 14 mm screw using a Phillips screwdriver.

Remove the one M4 x 14 mm screw using a Phillips screwdriver.

Step 7

  • Gently lift away the switch and wires.

Gently lift away the switch and wires.

Step 8

  • Press down the handle lock button.
  • Force-ably twist and pull away the left side handle assembly.

Press down the handle lock button.

Force-ably twist and pull away the left side handle assembly.

Step 9

              Power Trigger
  • Using a bit driver, carefully remove the 4 M3.5 X 7mm holding the wires on.
  • Remember the order and position of each wire.

Using a bit driver, carefully remove the 4 M3.5 X 7mm holding the wires on.

Remember the order and position of each wire.

Step 10

  • The Switch is now free of the Grinder. Dispose of the broken Switch and install your new Switch.

The Switch is now free of the Grinder. Dispose of the broken Switch and install your new Switch.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Alexander Armstrong

Member since: 01/10/2019

85 Reputation

                                      1 Guide authored                  



                       Badges:
                       3

Team

                       Oregon Institute of Technology, Team S1-G2, Lancaster Winter 2019                        

                                                  Member of Oregon Institute of Technology, Team S1-G2, Lancaster Winter 2019 



                    OIT-LANCASTER-W19S1G2                     


                                            4 Members                     


                                            6 Guides authored