Ridgid Belt Sander R2740 Power Cord Replacement Repair Guide

Difficulty

Easy

Steps

3

Time Required

                          10 - 15 minutes            

Sections

1

• Power Cord
• 3 steps

Flags

0

• BackRidgid Belt Sander R2740

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Power Cord               

• Orient the belt sander so that the RIDGID logo is facing you.
• Remove the six 19 mm and three 51 mm T20 screws that hold the cover into place.
• Remove the cover from the belt sander.
• Make sure you remember the correct placement of each screw.

Orient the belt sander so that the RIDGID logo is facing you.

Remove the six 19 mm and three 51 mm T20 screws that hold the cover into place.

Remove the cover from the belt sander.

Make sure you remember the correct placement of each screw.

1024

Step 2

• Remove the two 16 mm T10 screws.
• Remove the support bracket that holds the power cord into place.

Remove the two 16 mm T10 screws.

Remove the support bracket that holds the power cord into place.

Step 3

• Lift the power cord from the resting grooves.
• Rotate the switch so that the lock-on button is facing you.
• Loosen the two 8 mm Phillips #3 screws.
• Pull the two wires away from the switch.

Lift the power cord from the resting grooves.

Rotate the switch so that the lock-on button is facing you.

Loosen the two 8 mm Phillips #3 screws.

Pull the two wires away from the switch.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      3 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Cameron Smith                     

Member since: 01/10/2019

303 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       Oregon Institute of Technology, Team S1-G1, Lancaster Winter 2019                        

                                                  Member of Oregon Institute of Technology, Team S1-G1, Lancaster Winter 2019 



                    OIT-LANCASTER-W19S1G1                     


                                            4 Members                     


                                            6 Guides authored