Difficulty
Easy
Steps
3
Time Required
5 minutes
Sections
1
- Blade
- 3 steps
Flags
0
BackRidgid Circular Saw R3205
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Blade
- Press the black spindle lock and hold it down.
- While keeping the spindle lock pressed down use a 6mm allen wrench to remove the 5/16-18 x 0.55 inch screw.
Press the black spindle lock and hold it down.
While keeping the spindle lock pressed down use a 6mm allen wrench to remove the 5/16-18 x 0.55 inch screw.
1024
Step 2
- Release the spindle lock and remove the outer flange by lifting it off the output shaft.
Release the spindle lock and remove the outer flange by lifting it off the output shaft.
Step 3
- With the outer flange removed retract the lower blade guard into the upper blade guard housing by pushing on the black lever.
- Slide the blade out of from the bottom of the saw.
With the outer flange removed retract the lower blade guard into the upper blade guard housing by pushing on the black lever.
Slide the blade out of from the bottom of the saw.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
2 other people completed this guide.
Author
with 2 other contributors
Joshua Caron
Member since: 04/05/2019
738 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team S5-G2, Julie Spring 2019
Member of UMass Dartmouth, Team S5-G2, Julie Spring 2019
UMASSD-JULIE-S19S5G2
5 Members
5 Guides authored
