Difficulty

Moderate

Steps

7

Time Required

                          30 minutes

Sections

2

  • Blade
  • 3 steps
  • Lower Blade Guard
  • 4 steps

Flags

0

  • BackRidgid Circular Saw R3205

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Blade
  • Press the black spindle lock and hold it down.
  • While keeping the spindle lock pressed down use a 6mm allen wrench to remove the 5/16-18 x 0.55 inch screw.

Press the black spindle lock and hold it down.

While keeping the spindle lock pressed down use a 6mm allen wrench to remove the 5/16-18 x 0.55 inch screw.

1024

Step 2

  • Release the spindle lock and remove the outer flange by lifting it off the output shaft.

Release the spindle lock and remove the outer flange by lifting it off the output shaft.

Step 3

  • With the outer flange removed retract the lower blade guard into the upper blade guard housing by pushing on the black lever.
  • Slide the blade out of from the bottom of the saw.

With the outer flange removed retract the lower blade guard into the upper blade guard housing by pushing on the black lever.

Slide the blade out of from the bottom of the saw.

Step 4

              Lower Blade Guard
  • Use a prying tool or your fingers to remove the inner flange.

Use a prying tool or your fingers to remove the inner flange.

Step 5

  • Remove the external retaining ring with a screwdriver by expanding it and then prying it out.

Remove the external retaining ring with a screwdriver by expanding it and then prying it out.

Step 6

  • After removing the external retaining ring, remove (OD50 x ID42 x 0.8t) washer.

After removing the external retaining ring, remove (OD50 x ID42 x 0.8t) washer.

Step 7

  • Remove the lower blade guard after removing the washer.

Remove the lower blade guard after removing the washer.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      One other person completed this guide.

Author

                                      with 2 other contributors 


                    Joshua  Caron

Member since: 04/05/2019

738 Reputation

                                      5 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       UMass Dartmouth, Team S5-G2, Julie Spring 2019                        

                                                  Member of UMass Dartmouth, Team S5-G2, Julie Spring 2019 



                    UMASSD-JULIE-S19S5G2                     


                                            5 Members                     


                                            5 Guides authored