Difficulty
Moderate
Steps
4
Time Required
10 minutes
Sections
1
- Motor Housing with Handle Assembly
- 4 steps
Flags
Featured Student Guide
This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.
BackRidgid Circular Saw R3205
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Motor Housing with Handle Assembly
- Remove the brush assembly with a flat head screwdriver.
Remove the brush assembly with a flat head screwdriver.
1024
Step 2
- Use a T25 Torx screwdriver to remove 3 (M5 x 58 mm) screws.
Use a T25 Torx screwdriver to remove 3 (M5 x 58 mm) screws.
Step 3
- Use a T20 Torx screwdriver to remove the (1/4-20 x 0.66 in.) screw.
- After removing the (1/4-20 x 0.66 in.) screw the lever assembly can be unscrewed from the (1/4-20 x 0.66 in.) screw.
Use a T20 Torx screwdriver to remove the (1/4-20 x 0.66 in.) screw.
After removing the (1/4-20 x 0.66 in.) screw the lever assembly can be unscrewed from the (1/4-20 x 0.66 in.) screw.
Step 4
- The motor housing assembly can now be removed from the rest of the saw.
The motor housing assembly can now be removed from the rest of the saw.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 1 other contributor
Joshua Caron
Member since: 04/05/2019
738 Reputation
5 Guides authored
Badges:
9
+6 more badges
Team
UMass Dartmouth, Team S5-G2, Julie Spring 2019
Member of UMass Dartmouth, Team S5-G2, Julie Spring 2019
UMASSD-JULIE-S19S5G2
5 Members
5 Guides authored
