Difficulty

Moderate

Steps

5

Time Required

                          15 minutes

Sections

2

  • Outer Case
  • 4 steps
  • Forward / Reverse Selector Switch
  • 1 step

Flags

1

This guide has been the hard work of our awesome students and is found to be exceptionally cool by the iFixit staff.

  • BackRidgid GEN5X R8611506

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              Outer Case
  • Orient the drill to have the side with the screws facing up.
  • Using the Torx T10 screwdriver, remove the eight 4.0mm screws from the face of the drill.

Orient the drill to have the side with the screws facing up.

Using the Torx T10 screwdriver, remove the eight 4.0mm screws from the face of the drill.

1024

Step 2

  • Orient the drill to where the back is facing up.
  • Using a Torx T10 screwdriver, remove the four 6.0mm screws that attach the back piece to the drill.
  • Remove the back piece of the drill using the iFixit opening tool.

Orient the drill to where the back is facing up.

Using a Torx T10 screwdriver, remove the four 6.0mm screws that attach the back piece to the drill.

Remove the back piece of the drill using the iFixit opening tool.

Step 3

  • Orient the drill to where the chuck is facing up.
  • Using the Torx T15 screwdriver, remove the four 8.0mm screws from the front of the drill.

Orient the drill to where the chuck is facing up.

Using the Torx T15 screwdriver, remove the four 8.0mm screws from the front of the drill.

Step 4

  • Orient the drill so the side with the screw holes is facing up.
  • Use a plastic opening tool to gently pry the face off of the drill.
  • Remove the face completely from the drill.

Orient the drill so the side with the screw holes is facing up.

Use a plastic opening tool to gently pry the face off of the drill.

Remove the face completely from the drill.

Step 5

              Forward / Reverse Selector Switch
  • Gently lift the trigger up.
  • Unhook the selector switch from the trigger.
  • Remove the selector switch.

Gently lift the trigger up.

Unhook the selector switch from the trigger.

Remove the selector switch.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 2 other contributors 


                    Harrison Essary

Member since: 02/05/2019

611 Reputation

                                      6 Guides authored                  



                       Badges:
                       9







                                                        +6 more badges

Team

                       Appalachian State University, Team S2-G4, Menagarishvili Spring 2019                        

                                                  Member of Appalachian State University, Team S2-G4, Menagarishvili Spring 2019 



                    APSU-MENAGARISHVILI-S19S2G4                     


                                            3 Members                     


                                            12 Guides authored