Ridgid Gen5X R8611506 Trigger Replacement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          15 minutes            

Sections

2

• Outer Case
• 4 steps
• Trigger
• 1 step

Flags

0

• BackRidgid GEN5X R8611506

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Outer Case               

• Orient the drill to have the side with the screws facing up.
• Using the Torx T10 screwdriver, remove the eight 4.0mm screws from the face of the drill.

Orient the drill to have the side with the screws facing up.

Using the Torx T10 screwdriver, remove the eight 4.0mm screws from the face of the drill.

1024

Step 2

• Orient the drill to where the back is facing up.
• Using a Torx T10 screwdriver, remove the four 6.0mm screws that attach the back piece to the drill.
• Remove the back piece of the drill using the iFixit opening tool.

Orient the drill to where the back is facing up.

Using a Torx T10 screwdriver, remove the four 6.0mm screws that attach the back piece to the drill.

Remove the back piece of the drill using the iFixit opening tool.

Step 3

• Orient the drill to where the chuck is facing up.
• Using the Torx T15 screwdriver, remove the four 8.0mm screws from the front of the drill.

Orient the drill to where the chuck is facing up.

Using the Torx T15 screwdriver, remove the four 8.0mm screws from the front of the drill.

Step 4

• Orient the drill so the side with the screw holes is facing up.
• Use a plastic opening tool to gently pry the face off of the drill.
• Remove the face completely from the drill.

Orient the drill so the side with the screw holes is facing up.

Use a plastic opening tool to gently pry the face off of the drill.

Remove the face completely from the drill.

Step 5

              Trigger               

• Use a plastic opening tool to gently pry the trigger from the brown connector.

Use a plastic opening tool to gently pry the trigger from the brown connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 3 other contributors 

                    Harrison Essary                     

Member since: 02/05/2019

611 Reputation

                                      6 Guides authored                  



                       Badges:
                       9





                                                        +6 more badges                           

Team

                       Appalachian State University, Team S2-G4, Menagarishvili Spring 2019                        

                                                  Member of Appalachian State University, Team S2-G4, Menagarishvili Spring 2019 



                    APSU-MENAGARISHVILI-S19S2G4                     


                                            3 Members                     


                                            12 Guides authored