Difficulty
Easy
Steps
2
Time Required
3 minutes
Sections
1
- Base Assembly
- 2 steps
Flags
0
BackRidgid GEN5X R8653
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Base Assembly
- Always disconnect battery and use gloves when working with the saw blade. Failure to do so may result in damage or injury!
- Remove the supplied Allen wrench from it’s nesting space in the front of the handle.
- Depress and hold the spindle lock button located between the handle and blade shroud.
- Using the supplied 6mm Allen Wrench, unscrew the bolt securing the blade and remove the blade.
Always disconnect battery and use gloves when working with the saw blade. Failure to do so may result in damage or injury!
Remove the supplied Allen wrench from it’s nesting space in the front of the handle.
Depress and hold the spindle lock button located between the handle and blade shroud.
Using the supplied 6mm Allen Wrench, unscrew the bolt securing the blade and remove the blade.
1024
Step 2
- Remove seven 6mm T20 Torx screws located around base of saw.
- Pull base assembly away from saw.
- These screws are very tight and need significant force to be removed.
Remove seven 6mm T20 Torx screws located around base of saw.
Pull base assembly away from saw.
These screws are very tight and need significant force to be removed.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 3 other contributors
Andrew Burke
Member since: 09/18/2019
663 Reputation
5 Guides authored
Badges:
8
+5 more badges
Team
Embry-Riddle Aeronautical University, Team S1-G2, Watkins Fall 2019
Member of Embry-Riddle Aeronautical University, Team S1-G2, Watkins Fall 2019
ERAU-WATKINS-F19S1G2
4 Members
5 Guides authored
