Difficulty
Moderate
Steps
5
Time Required
5 minutes
Sections
2
- Top Cover
- 2 steps
- Power Switch
- 3 steps
Flags
0
BackRidgid R2601
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Top Cover
- Remove the four M3.5 x 16 mm screws from the top cover using a Torx T10 screwdriver.
Remove the four M3.5 x 16 mm screws from the top cover using a Torx T10 screwdriver.
1024
Step 2
- Pull off the top cover.
Pull off the top cover.
Step 3
Power Switch
- Remove the plastic switch component by prying it upward with your fingers.
Remove the plastic switch component by prying it upward with your fingers.
Step 4
- Pry the switch off using a metal spudger to help.
Pry the switch off using a metal spudger to help.
Step 5
- Pull off the wiring to detach the switch. The switch can now be replaced.
Pull off the wiring to detach the switch. The switch can now be replaced.
To reassemble your device, follow these instructions in reverse order.
Cancel: I did not complete this guide.
Author
with 2 other contributors
Ellie Lott
Member since: 02/05/2019
461 Reputation
4 Guides authored
Badges:
5
+2 more badges
Team
UC Davis, Team S20-G3, Lore Winter 2019
Member of UC Davis, Team S20-G3, Lore Winter 2019
UCD-LORE-W19S20G3
3 Members
4 Guides authored
