Ridgid R32104 Trigger Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          15 minutes            

Sections

1

• Trigger
• 6 steps

Flags

0

• BackRIDGID R32104

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Trigger               

• Turn off your saw and unplug before starting.
• Place the Worm Drive Saw down and adjust the base plate, so that way the main housing assembly and handle set is easily accessible.

Turn off your saw and unplug before starting.

Place the Worm Drive Saw down and adjust the base plate, so that way the main housing assembly and handle set is easily accessible.

1024

Step 2

• Using the Torque 20 screwdriver, remove the twelve 3/10 cm screws holding the handle set together.

Using the Torque 20 screwdriver, remove the twelve 3/10 cm screws holding the handle set together.

Step 3

• Carefully remove the handle set from the main housing assembly.

Carefully remove the handle set from the main housing assembly.

Step 4

• Place the Worm Drive Saw on its side to help remove the trigger.
• Use the Torque 20 screwdriver to remove the single 3/10 cm screw that attaches the trigger switch to the handle set.

Place the Worm Drive Saw on its side to help remove the trigger.

Use the Torque 20 screwdriver to remove the single 3/10 cm screw that attaches the trigger switch to the handle set.

Step 5

• Use the Phillips 2 screwdriver to remove the four 3/10 cm screws holding the trigger and four wires, from the main housing assembly, in place.

Use the Phillips 2 screwdriver to remove the four 3/10 cm screws holding the trigger and four wires, from the main housing assembly, in place.

Step 6

• Remove the trigger switch and trigger from the handle set.

Remove the trigger switch and trigger from the handle set.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Lucas Pimentel                     

Member since: 04/02/2019

1,010 Reputation

                                      8 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       UMass Dartmouth, Team S5-G1, Julie Spring 2019                        

                                                  Member of UMass Dartmouth, Team S5-G1, Julie Spring 2019 



                    UMASSD-JULIE-S19S5G1                     


                                            4 Members                     


                                            8 Guides authored