Ridgid R82005 2 Speed Gear Train Replacement Repair Guide

Difficulty

Easy

Steps

5

Time Required

                          10 minutes            

Sections

2

• Housing Assembly
• 4 steps
• 2 Speed Gear Train
• 1 step

Flags

0

• BackRidgid R82005

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Housing Assembly               

• Eject the battery from the drill.
• Unscrew the seven M3x15.3mm screws, with the 2mm hex screwdriver bit, that secures the Housing Assembly.

Eject the battery from the drill.

Unscrew the seven M3x15.3mm screws, with the 2mm hex screwdriver bit, that secures the Housing Assembly.

1024

Step 2

• Push the metallic Housing Connecting clip out with flat side of the plastic opening tool.
• Eject battery before attempting this step.

Push the metallic Housing Connecting clip out with flat side of the plastic opening tool.

Eject battery before attempting this step.

Step 3

• Remove the top half of the Housing Assembly.

Remove the top half of the Housing Assembly.

Step 4

• Grasp carefully the top and bottom of drill components.
• LED light needs to be manually removed.
• Lift and transfer, as a whole, the drill components from the old housing assembly to the new housing.
• Make sure all drill components fit properly in the grooves of new Housing Assembly.

Grasp carefully the top and bottom of drill components.

LED light needs to be manually removed.

Lift and transfer, as a whole, the drill components from the old housing assembly to the new housing.

Make sure all drill components fit properly in the grooves of new Housing Assembly.

Step 5

              2 Speed Gear Train               

• Remove the 2 speed gear selector by carefully lifting it out of the housing, making sure it is free from the speed switch rail.
• The 2 speed gear selector may fall out on its own.
• When reassembling, make sure all drill components fit properly in the grooves of the Housing Assembly.

Remove the 2 speed gear selector by carefully lifting it out of the housing, making sure it is free from the speed switch rail.

The 2 speed gear selector may fall out on its own.

When reassembling, make sure all drill components fit properly in the grooves of the Housing Assembly.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Andrew McPherson                     

Member since: 02/14/2019

443 Reputation

                                      3 Guides authored                  



                       Badges:
                       15







                                                        +12 more badges                           

Team

                       USF Tampa, Team S1-G2, Leahy Spring 2019                        

                                                  Member of USF Tampa, Team S1-G2, Leahy Spring 2019 



                    USFT-LEAHY-S19S1G2                     


                                            4 Members                     


                                            10 Guides authored