Ridgid R82005 Trigger Switch Replacement Repair Guide

Difficulty

Difficult

Steps

4

Time Required

                          1 hour            

Sections

1

• Trigger Switch
• 4 steps

Flags

0

• BackRidgid R82005

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Trigger Switch               

• Eject the battery from the drill.
• Unscrew the seven M3x15.3mm screws, with the 2mm hex screwdriver bit, that secures the Housing Assembly.
• Unscrew the M5x18.5mm screw if belt clip is attached.

Eject the battery from the drill.

Unscrew the seven M3x15.3mm screws, with the 2mm hex screwdriver bit, that secures the Housing Assembly.

Unscrew the M5x18.5mm screw if belt clip is attached.

1024

Step 2

• Push the metallic Housing Connecting clip out with flat side of the plastic spudger.
• Eject battery before attempting this step.

Push the metallic Housing Connecting clip out with flat side of the plastic spudger.

Eject battery before attempting this step.

Step 3

• Remove the top half of the Housing Assembly.
• Keep track of where the wires lead from the motor assembly to trigger switch.
• Remove all internal components.

Remove the top half of the Housing Assembly.

Keep track of where the wires lead from the motor assembly to trigger switch.

Remove all internal components.

Step 4

• Motor Assembly/Gearbox and Trigger Switch removed from Housing Assembly.
• Desolder the black wire connected to the motor.
• Flip Trigger Switch and desolder red wire.
• To learn how to solder, use our How to Solder and Desolder Connections guide.

Motor Assembly/Gearbox and Trigger Switch removed from Housing Assembly.

Desolder the black wire connected to the motor.

Flip Trigger Switch and desolder red wire.

To learn how to solder, use our How to Solder and Desolder Connections guide.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 1 other contributor 

                    Alex Cominos                     

Member since: 02/14/2019

376 Reputation

                                      2 Guides authored                  



                       Badges:
                       12







                                                        +9 more badges                           

Team

                       USF Tampa, Team S1-G2, Leahy Spring 2019                        

                                                  Member of USF Tampa, Team S1-G2, Leahy Spring 2019 



                    USFT-LEAHY-S19S1G2                     


                                            4 Members                     


                                            10 Guides authored