Difficulty

Moderate

Steps

5

Time Required

Suggest a time??

Sections

2

  • RIDGID R84015 X2 Case Removal
  • 3 steps
  • Speed Switch
  • 2 steps

Flags

1

Missing Prerequisites

This guide is missing information on how to start the process. Make a prerequisite guide!

  • BackRIDGID R84015 X2

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Introduction

What you need

Step 1

              RIDGID R84015 X2 Case Removal
  • Remove the backplate.
  • Using a Torx T20 screwdriver, remove the four screws attaching the back plate.

Remove the backplate.

Using a Torx T20 screwdriver, remove the four screws attaching the back plate.

1024

Step 2

  • Remove the drill handle.
  • Using the Phillips #2 screwdriver, remove the five screws attaching the drill handle to the body.

Remove the drill handle.

Using the Phillips #2 screwdriver, remove the five screws attaching the drill handle to the body.

Step 3

  • Remove the gear casing from the body.
  • Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.

Remove the gear casing from the body.

Using the Philips #2 screwdriver, remove the four screws attaching the gear casing to the body.

Step 4

              Speed Switch
  • Locate small metal bar above plastic part of drill.
  • Attempt to move bar back and forth. If it wont move, try to move it while rotating the chuck. If it still will not move, there is a problem with the gears. For help see the Planetary Gear Replacement Guide

Locate small metal bar above plastic part of drill.

Attempt to move bar back and forth. If it wont move, try to move it while rotating the chuck. If it still will not move, there is a problem with the gears. For help see the Planetary Gear Replacement Guide

Step 5

  • If the bar moves, next check the small plastic switch that is numbered 1 and 2.
  • Make sure the small tabs on the underside of the switch that move the bar are intact.
  • Replace switch as needed.

If the bar moves, next check the small plastic switch that is numbered 1 and 2.

Make sure the small tabs on the underside of the switch that move the bar are intact.

Replace switch as needed.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.

Author

                                      with 6 other contributors 


                    Evan Long

Member since: 04/15/2010

247 Reputation

                                      4 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges

Team

                       Cal Poly, Team 15-48, Garner Spring 2010                        

                                                  Member of Cal Poly, Team 15-48, Garner Spring 2010 



                    CPSU-GARNER-S10S15G48                     


                                            6 Members                     


                                            10 Guides authored