Difficulty

Moderate

Steps

6

Time Required

                          10 minutes            

Sections

1

  • Gearbox
  • 6 steps

Flags

5

In Progress

This guide is a work in progress. Reload periodically to see the latest changes!

Needs Better Images

Better photos will improve this guide. Help out by taking, editing, or uploading new ones!

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

Missing Details

Some of this guide’s details are missing. Help users by adding tools, difficulty, or time.

  • BackRidgid R86008

  • Full Screen

  • Options

  • History

  • Save to Favorites

  • Download PDF

  • Edit

  • Translate

  • Get Shareable Link

  • Embed This Guide

  • Notify Me of Changes

  • Stop Notifications

Step 1

              Gearbox               
  • Before you begin make sure battery is removed from drill.
  • Loosen the four 13mm T10 Torx screws from the back of the drill and remove cap.

Before you begin make sure battery is removed from drill.

Loosen the four 13mm T10 Torx screws from the back of the drill and remove cap.

1024

Step 2

  • Remove the two 25mm T10 Torx screws from the front of the drill.

Remove the two 25mm T10 Torx screws from the front of the drill.

Step 3

  • Remove the remaining 13mm T10 Torx screws and pull apart drill case.

Remove the remaining 13mm T10 Torx screws and pull apart drill case.

Step 4

  • Identify gearbox.

Identify gearbox.

Step 5

  • Using a PH1 screwdriver, remove the four 13mm PH screws from the back of the gearbox.
  • It may be easier to unscrew the screws by separating the front end of the drill from the rest of the drill.

Using a PH1 screwdriver, remove the four 13mm PH screws from the back of the gearbox.

It may be easier to unscrew the screws by separating the front end of the drill from the rest of the drill.

Step 6

  • Pull apart gearbox.

Pull apart gearbox.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

Author

                                      with 1 other contributor 

                    Lauren Dierkop                     

Member since: 01/22/2019

183 Reputation

                                      1 Guide authored                  



                       Badges:
                       2

Team

                       Eastern Washington University, Team S2-G7, Munoz Winter 2019                        

                                                  Member of Eastern Washington University, Team S2-G7, Munoz Winter 2019 



                    EWU-MUNOZ-W19S2G7                     


                                            5 Members                     


                                            1 Guide authored