Ridgid R86037 Coupler Replacement Repair Guide

Difficulty

Moderate

Steps

7

Time Required

                          10 minutes            

Sections

1

• Coupler
• 7 steps

Flags

0

• BackRidgid R86037

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Coupler               

• Using a Torx screwdriver, remove the four M2.2x1 inch screws from the end cap.

Using a Torx screwdriver, remove the four M2.2x1 inch screws from the end cap.

1024

Step 2

• Remove the end cap from the back of the driver.

Remove the end cap from the back of the driver.

Step 3

• Remove the two M3.5x10 mm screws from the back of the driver under the end cap.

Remove the two M3.5x10 mm screws from the back of the driver under the end cap.

Step 4

• Remove the seven M3.5x16 mm screws from the right side of the driver.

Remove the seven M3.5x16 mm screws from the right side of the driver.

Step 5

• Remove the side of the driver, exposing the inner machinery.

Remove the side of the driver, exposing the inner machinery.

Step 6

• Remove the coupler by pulling up and releasing it from the gear assembly.

Remove the coupler by pulling up and releasing it from the gear assembly.

Step 7

• Detach the wire plug from the device and replace the old coupler with the new coupler.

Detach the wire plug from the device and replace the old coupler with the new coupler.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 3 other contributors 

                    Luke Stokes                     

Member since: 01/16/2019

461 Reputation

                                      2 Guides authored                  



                       Badges:
                       8







                                                        +5 more badges                           

Team

                       University of Alabama, Team S2-G4, Bedsole Spring 2019                        

                                                  Member of University of Alabama, Team S2-G4, Bedsole Spring 2019 



                    UA-BEDSOLE-S19S2G4                     


                                            4 Members                     


                                            3 Guides authored