Ring Video Doorbell Battery Replacement Repair Guide

Difficulty

Moderate

Steps

2

Time Required

                          5 - 10 minutes            

Sections

1

• Battery
• 2 steps

Flags

0

• BackRing Video Doorbell

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Battery               

• Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw’s on the bottom of the device.
• Pry open the aluminium plate using the Plastic Opening Tool(s).
• Remove the 2 1. mm screws using the PH00 Phillips Screwdriver.

Start by using the PH00 Phillips Screwdriver to take out the 6 1 mm screw’s on the bottom of the device.

Pry open the aluminium plate using the Plastic Opening Tool(s).

Remove the 2 1. mm screws using the PH00 Phillips Screwdriver.

1024

Step 2

• Pry open the back case as shown using the Plastic Opening Tool.
• Do NOT lift the case of all the way, there is still a cable connecting the two pieces.
• Disconnect the battery from motherboard by carefully pulling up on the connector.

Pry open the back case as shown using the Plastic Opening Tool.

Do NOT lift the case of all the way, there is still a cable connecting the two pieces.

Disconnect the battery from motherboard by carefully pulling up on the connector.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 2 other contributors 

                    Abdulrahman                     

Member since: 02/20/2018

631 Reputation

                                      3 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       USF Tampa, Team S11-G5, Cheng Spring 2018                        

                                                  Member of USF Tampa, Team S11-G5, Cheng Spring 2018 



                    USFT-CHENG-S18S11G5                     


                                            3 Members                     


                                            5 Guides authored                     

William Price - Oct 20, 2018

Reply

Where do I get a replacement battery?

David Haras - Mar 29, 2020

Reply

I had an issue where the battery would not charge the light when I was trying to charge the battery flashed bue quickly, I removed the battery and found that the connector was corroded after cleaning it and making sure it was connected correctly the battery then took a full charge and now the bell functions as intended once again.

P.S thanks for the guide :)

d.rayyan - Apr 21, 2021

Reply

Who should the complete unit be sent to for checkup and repairs as it does not work

can it be sent to the manufacturers for a replacement