Ring Video Doorbell Pro Housing Repalcement Repair Guide

Difficulty

Moderate

Steps

5

Time Required

                          5 - 10 minutes            

Sections

1

• Housing
• 5 steps

Flags

0

• BackRing Video Doorbell Pro

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

Introduction

What you need

Step 1

              Housing               

• Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.

Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.

1024

Step 2

• Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.

Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.

Step 3

• Using a PH-000 screwdriver, unscrew and set aside all four of these 5.25 mm screws.

Using a PH-000 screwdriver, unscrew and set aside all four of these 5.25 mm screws.

Step 4

• Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device.

Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device.

Step 5

• Remove the front of the device from the back plate.

Remove the front of the device from the back plate.

To reassemble your device, attach the new housing and follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      4 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Jake Dixon                     

Member since: 11/09/2017

835 Reputation

                                      4 Guides authored                  



                       Badges:
                       11







                                                        +8 more badges                           

Team

                       IUPUI, Team S7-G4, Baechle Fall 2017                        

                                                  Member of IUPUI, Team S7-G4, Baechle Fall 2017 



                    IUPUI-BAECHLE-F17S7G4                     


                                            3 Members                     


                                            5 Guides authored