Difficulty
Moderate
Steps
9
Time Required
5 - 25 minutes
Sections
2
- Housing
- 5 steps
- Speaker
- 4 steps
Flags
0
BackRing Video Doorbell Pro
Full Screen
Options
History
Save to Favorites
Download PDF
Edit
Translate
Get Shareable Link
Embed This Guide
Notify Me of Changes
Stop Notifications
Introduction
What you need
Step 1
Housing
- Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.
Start by using the star-shaped end of the included Ring screwdriver to take out the 5 mm screw on the bottom of the device.
1024
Step 2
- Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.
Use your thumbs to apply downward pressure on the glass part of the device while pulling the faceplate up and off of the device.
Step 3
- Using a PH-000 screwdriver, unscrew and set aside all four of these 5.25 mm screws.
Using a PH-000 screwdriver, unscrew and set aside all four of these 5.25 mm screws.
Step 4
- Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device.
Using a plastic pry tool, go along the edge of the device prying the device apart. While doing this, focus on the four clips, two of which are on either side of the device.
Step 5
- Remove the front of the device from the back plate.
Remove the front of the device from the back plate.
Step 6
Speaker
- With the Video Doorbell Pro opened up the speaker is exposed.
With the Video Doorbell Pro opened up the speaker is exposed.
Step 7
- Remove this 5.25 mm screw.
Remove this 5.25 mm screw.
Step 8
- Remove this wire connection by gently prying it off with a plastic pry tool.
Remove this wire connection by gently prying it off with a plastic pry tool.
Step 9
- Remove the speaker from the device.
Remove the speaker from the device.
To reassemble your device, insert the new speaker and follow these instructions in reverse order.
Cancel: I did not complete this guide.
6 other people completed this guide.
Author
with 4 other contributors
Jake Dixon
Member since: 11/09/2017
835 Reputation
4 Guides authored
Badges:
11
+8 more badges
Team
IUPUI, Team S7-G4, Baechle Fall 2017
Member of IUPUI, Team S7-G4, Baechle Fall 2017
IUPUI-BAECHLE-F17S7G4
3 Members
5 Guides authored
Robin Feild - Dec 19, 2018
Reply
Hi Jake. This looks brilliant - I would love to contact you directly as I have a further question about this. My member name is robinfeild, and my email is email is robinfeild@gmail.com.
Hope to hear from you!
Thanks
Robin
John Clark - May 2, 2020
Reply
Anyone happen to know where you can purchase the replacement speaker from?
Volodymyr Kazantsev - May 18, 2020
Reply
Where did you get a replacement speaker from?
Sammy - Apr 28, 2021
Reply
cagedbat - Jul 1, 2021
Reply
I dismantled the speaker in mine having verified it was faulty by testing it with one from a standard Ring Doorbell, (It has the same connector but the housing is a different shape. Having cracked open the plastic housing of the speaker it has one of these inside (1w 8 Ohm Rectangular speaker 15113.5mm) such as https://www.ebay.co.uk/itm/224485373996 a couple of drops of superglue and two dabs of solder, works like new.