Rival 16131 Toaster Bread Shelf Replacement Repair Guide

Difficulty

Moderate

Steps

6

Time Required

                          10 - 15 minutes            

Sections

2

• Disassembling Rival 16131 Toaster Shell
• 4 steps
• Bread Shelf Repair
• 2 steps

Flags

Needs More Images

A few more images would make this guide’s procedures crystal clear.

Better Introduction

Improve this guide by completing or revising its introduction.

• BackRival 16131 Toaster

• Full Screen

• Options

• History

• Save to Favorites

• Download PDF

• Edit

• Translate

• Get Shareable Link

• Embed This Guide

• Notify Me of Changes

• Stop Notifications

What you need

Step 1

              Disassembling Rival 16131 Toaster Shell               

• Make sure the toaster is unplugged before dissembling.
• Turn the toaster over and remove the rubber bumper feet.

Make sure the toaster is unplugged before dissembling.

Turn the toaster over and remove the rubber bumper feet.

1024

Step 2

• Use a Phillips head screwdriver to remove all four 12 mm screws that are attached to the toaster shell.

Use a Phillips head screwdriver to remove all four 12 mm screws that are attached to the toaster shell.

Step 3

• With the dial facing you, push the toaster base up and away until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster.
• When reassembling the toaster, make sure that the back of the dial lines up with the slot, both in position and orientation (the dial and slot are not perfect circles - they have a notch).
• The only object holding the shell onto the toaster now is the grey part of the lever.

With the dial facing you, push the toaster base up and away until the base is just over the lip of the shell. This will disconnect the browning dial from the rest of the toaster.

When reassembling the toaster, make sure that the back of the dial lines up with the slot, both in position and orientation (the dial and slot are not perfect circles - they have a notch).

The only object holding the shell onto the toaster now is the grey part of the lever.

Step 4

• Reach into the shell and grab the back white part of the lever.
• Hold the grey lever with both your index finger and middle finger. Next, pull it.
• Pulling too hard will break the mechanism that holds the grey handle onto the white lever.
• Next, remove the shell.

Reach into the shell and grab the back white part of the lever.

Hold the grey lever with both your index finger and middle finger. Next, pull it.

Pulling too hard will break the mechanism that holds the grey handle onto the white lever.

Next, remove the shell.

Step 5

              Bread Shelf Repair               

• After disassembling the toaster, turn the back side of the toaster towards you.
• On the back of the toaster the metal tabs attached to the bread shelf should be visible.
• These tabs will sometimes get caught in the shaft which disables your toaster from returning the bread.

After disassembling the toaster, turn the back side of the toaster towards you.

On the back of the toaster the metal tabs attached to the bread shelf should be visible.

These tabs will sometimes get caught in the shaft which disables your toaster from returning the bread.

Step 6

• Twist the metal tabs to vertical position to allow them to glide along the slot.
• Push down on the white lever on the opposite side repeatedly to ensure that the metal tabs will no longer stick.

Twist the metal tabs to vertical position to allow them to glide along the slot.

Push down on the white lever on the opposite side repeatedly to ensure that the metal tabs will no longer stick.

To reassemble your device, follow these instructions in reverse order.

Cancel: I did not complete this guide.

                                                                                      2 other people completed this guide.                                             

Author

                                      with 5 other contributors 

                    Kristen                     

Member since: 09/26/2012

108 Reputation

                                      1 Guide authored                  



                       Badges:
                       9







                                                        +6 more badges                           

Team

                       Cal Poly, Team 2-8, Propen Fall 2012                        

                                                  Member of Cal Poly, Team 2-8, Propen Fall 2012 



                    CPSU-PROPEN-F12S2G8                     


                                            5 Members                     


                                            6 Guides authored